Manualshelf

Service Manual

ManualsBrandsDell ManualsComputer equipmentXPS One
21222324252627282930
Replacing Cards 27
4
Disconnect the TV tuner cable, remove the two screws securing the TV
tuner card and lift it out of the system board connector.
5
To replace the TV tuner card, align the notch on the TV tuner card with
the tab in the connector slot.
6
Insert the TV tuner card at a 45-degree angle into the system board
connector.
7
Replace the two screws that secure the TV tuner card and connect the TV
tuner cable to the connector on the card.
8
Replace the stand (see "Replacing the Stand" on page 13).
9
Replace the computer cover (see "Replacing the Computer Cover" on
page 11).
1 screws (2) 2 TV tuner cable
2
1
A5_bk0.book Page 27 Thursday, March 7, 2013 11:23 AM