Manualshelf

Service Manual

ManualsBrandsDell ManualsComputer equipmentXPS One
21222324252627282930
Replacing Cards 29
6
Remove the two screws securing the graphics card and lift it out of the
system board connector.
7
To replace the graphics card, align the notch on the graphics card with the
tab in the connector slot.
8
Replace the two screws that secures the graphics card.
NOTICE: To prevent damage to the graphics card, follow the marked sequence on
the graphics card heat sink to tighten the captive screws.
9
Align and tighten the six captive screws that secure the graphics card heat
sink.
10
Replace the stand (see "Replacing the Stand" on page 13).
11
Replace the computer cover (see "Replacing the Computer Cover" on
page 11).
1 screws (2) 2 graphics card
1
2
A5_bk0.book Page 29 Thursday, March 7, 2013 11:23 AM