Owner's manual

TABLE OF CONTENTS
2 FX-2000 Features
3 Before You Begin
3 Using the Meter In The Portable Mode
3 Check Calibration
4 Change the Set-Point
5 To Operate The Backlight
5 To Reset Meter
5 Testing Baled Hay
6 Testing in the Windrow
8 To Check Stored Readings
8 Factors Affecting Your Reading
9 Range of Moisture Content
9 Hay Temperature
10 Curing
10 Density
10 Use of Preservatives
11 Sample Size
11 Using the Meter For Continuous Monitoring
12 To Install The #1986 Bale Sensor
13 Installation on an Inline or Center Line
Small Square Baler
13 Installation on a Large or Mid-size Baler
13 Installation on a John Deere Round Baler
14 Installation on a New Holland or Case RBX
Round Baler
14 Installation on all other Round Balers
15 Using the Meter in the Continuous Mode
15 About Your Readings
16 Care of Your Meter
16 Warranty
17 Service For Your Meter