Instructions / Assembly

SET THE SCALE

Set the scale for #1 Wood, #2 Plaster/Concrete reference

scale, or #3 Gypsum.

hTo change the scale, press the scale button

#. The meter

will display the current scale for one second.

hTo scroll forward through the scales hold the scale button

# while the current scale is displayed and scroll to the

scale desired.

hTo scroll backward through the scales, press and hold the

set-point button

$ within one second of pressing and

releasing the scale button

#. Continue to hold the set-point

button

$ and the scale number will decrease.

hWhen scrolling in either direction, release the button to

stop at your desired scale.

Changing the scale will automatically reset the set-point

value to the default setting for that particular scale. Default

settings are as follows:

#1 Wood Scale - 15%

#2 Plaster/Concrete Reference Scale - 85

#3 Gypsum Scale - 1%

CHANGE THE SET-POINT

hTo change the set-point value press the set-point button

$. The meter will display the current set-point value for

the scale you have chosen for one second.

hTo scroll forward to a higher value for that scale hold the

set-point button

$ while the current set-point is displayed

and scroll to the set-point value desired.

hTo scroll backward through the set-point values, press and

hold the scale button

# within one second of pressing and

releasing the set-point button

hContinue to hold the scale button

# and the set-point

value will decrease.

hWhen scrolling in either direction, release the button to

stop at your desired set-point.