User manual PCMCIA adapter CardBus to 2x eSATA Product-No: 61618 User manual No: 61618-a www.delock.
Description The Delock PCMCIA adapter, CardBus to eSATA expands your notebook by two eSATA ports. You can connect different SATA devices such as external hard drives to the adapter. Specification • 2 x eSATA Ports • Serial ATA specification revision 1.0 • 32-Bit Card Bus Type II • Data transfer rate up to 1.5 Gbps • Hot Swap, Plug & Play • For Windows 98/98SE/ME/NT4.0/2000/XP/XP-64/Server 2003, Linux System requirements • PC or Notebook with a PCMCIA CardBus II Slot • Windows 98/98SE/ME/NT4.
Windows XP Service Pack 2 1. Switch on your computer. 2. Insert the card into your CardBus Slot. 3. Afterwards, Windows displays the Hardware wizard. Choose the option "No, not this time". 4. Put the driver CD in the CD ROM drive and click on "Next". 5. Choose "Install software automatically" and click "Next". 6. When driver is located, click "Continue installation". 7. Click on "Next". Click on "Finish". 8. Restart your PC. 9. After restart you can start using the device immediately. Windows 2000 1.
Support Delock If you have further questions, please contact our customer support support@delock.de / www.delock.com or phone 0700 - DELOCKGE (0700 - 335 625 43). You can contact our service hotline during the following times: Mon – Fri: 9:00 – 17:30 pm charge 0,12 € / min* * A connection fee applies according to fee schedule of Deutsche Telekom AG or your local telephone provider. All callers outside of Germany dial please 00493081789324 You can find current product information on our homepage: www.delock.
