User guide

Delock Docking Station SATA HDD > USB 3.0
Description
This HDD docking station enables an external connection of
a 2.5″ or 3.5″ SATA HDD via USB and offers stable hold
for your hard disk. This solution does not require any
external enclosure since you can just plug in the HDD only
into the docking station. The USB 3.0 standard enables you
to transfer the content of your HDD with a data transfer rate
of up to 5 Gb/s (SuperSpeed). In case your computer is not
equipped with a USB 3.0 interface you can also connect the
docking station via USB 2.0 or USB 1.1 port. However in
this connection you will not achieve a transfer rate of up to
5 Gb/s.
Specification
• Connector:
1 x USB 3.0 type B female
1 x DC jack
1 x 22 pin SATA 3 Gb/s female
1 x On-/ Off switch
• For 2.5″ and 3.5″ SATA HDD
• Suitable for all SATA HDDs up to SATA 6 Gb/s
• Data transfer rate up to 5 Gb/s
• LED indicator
• Plug & Play
Power supply specification
• Wall power supply
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1 A
• Output: 12 V / 2 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 9.5 mm
Item No. 61854
EAN 4043619618545
Country of origin Taiwan, Republic of
China
© 2013 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.
www.delock.com
1