Manual

Delock Converter IDE 44 Pin > mSATA with 2.5″ Frame (7 mm)
Description
This Delock converter enables you to connect a mSATA
SSD in full size format which can be used as a 2.5″ HDD.
The converter can be installed into your system internally
through an IDE 44 pin interface.
Specification
• Connector:
1 x IDE 44 pin male
1 x mSATA slot (full size)
• Form factor: 2.5″
• Height: 7 mm
• For 3.3 V mSATA module
• Supports ATA/ATAPI-7
• Supports ATA/ATAPI Ultra DMA mode
• Supports ATA/ATAPI PIO mode
• Jumper settings for Master, Slave and Cable Select mode
• Latch for mSATA module, full size can fit in
• Dimension (LxWxH): ca. 9,8 x 7,0 x 0,7 cm
• OS independent, no driver installation necessary
Item No. 62495
EAN 4043619624959
Country of origin Taiwan, Republic of
China
System requirements
• A free IDE 44 pin interface
Package content
• Converter
• 2.5″ frame
• 4 x screws
• User manual
Package
• Box
© 2013 by Delock. All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.
www.delock.com
1