Specifications

8
ANTI-TIP STABILITY DEVICE INSTALLATION INSTRUCTIONS
WARNING: In order to prevent accidental tipping of the appliance, for exam-
ple by a child climbing onto the open oven door, the stabilizing means must
be installed. Please refer to instructions for installation.
1. The anti-tip bracket has to be attached as shown on figure below (only rear cental
position), it has to be fixed on the floor and on the rear wall by no. 4 (four) suitable
screws (not supplied).
2. After fixing the anti-tip bracket, slide range into place. Be sure the rear central foot
slides under the anti-tip bracket attached.
=
=
Dotted line showing the position
of the range when installed
ANTI-TIP
STABILITY
DEVICE FIXING
Rear central
feet of range
Anti-tip
stability device
YOU MUST USE STABILITY
ANTI TIP BRACKET TO
PREVENT UNIT FROM
TIPPING.
INSTALLATION
Figure 1.9