Replacement Part List

9
Please note: if no timer is selected, the appliance will
auto shut o after 90 minutes of working.
Sear function
This feature heats the upper and/or lower plates to a higher
temperature for a few minutes. It is ideal for quickly searing
foods at the beginning of cooking (ideal for thick meat).
Press the start/stop button, then preheat the plates by
pressing the sear buttons (11 and 13). While preheating,
"SEAR" ashes on the display. When the thermostat reaches
the required temperature, the appliance emits a beep and
"SEAR" appears on the display. Put the food on the plates
immediately. The cycle is complete in a few minutes, and
"SEAR" disappears from the display.
Please note: This function can be used once only
in every 30 minutes. After the cycle, if you press the sear
function within 30 minutes, "SEAR" will ash on the display,
then goes o. The operation cannot be set on the control.
Wae mode (certain models only)
- Insert the wae plates (15c/15d) as show in g.1.
Please note that in this case the plates are not
interchangeable and the position of each plate must be
as shown in gure 10.
- Once the lower plate is inserted in the appliance,
appears on the display.
Turn the thermostat dials to the wae setting
and press the start/stop button.
- The appliance starts the preheating phase. When the
thermostat reaches the required temperature, the
appliance emits a beep, and is ready to use. "READY"
appears on the display.
- Lightly grease the plates with melted butter
- Add one dosing cup for each wae area.
- Spread the batter slightly and close the appliances.
- Cook according to the time indicated in the recipes.
If you set the timer, three beeps will sound at the end of
the cooking cycle, the timer will disappear and "END"
will appear on the display; the appliance switches o
automatically. If you do not select a time, at the end of
the last wae press the "start/stop" button to switch o
the appliance.
- To cook additional waes, simply add batter to the
lower wae plate and follow the above steps.
Important! do not use metal tools when removing
the wae from the wae plates as they may scratch the
non-stick surface.
CLEANING AND MAINTENANCE
User maintenance
- Never use metal cleaning tools which could scratch the
non-stick plates. Use wood or heat-resistant plastic
tools.
- Never leave plastic tools in contact with the hot plates,
including the cleaning tool supplied.
- Between cooking one food and the next, remove food
residues through the grease drain hole and collect them
in the grease tray, then clean with kitchen paper and
move on to the next cooking operation.
- Before cleaning the appliance, always leave the
appliance to cool down for at least 30 minutes.
Cleaning and care
Please note: Before cleaning the appliance, make
sure it has cooled down completely.
At the end of cooking, turn the appliance OFF and unplug
from the mains. Leave the appliance to cool down for at least
30 minutes. Use the special tool supplied to remove any food
residues from the plates. The tool can be washed by hand or
in the dishwasher. Empty the grease tray. The grease tray can
be washed by hand or in the dishwasher.
Press the plate release buttons (3) to remove the plates from
the appliance. Before touching them, make sure they have
cooled down completely.
The cooking plates are dishwasher safe although frequent
washing in a dishwasher could reduce the properties of the
coating. You are therefore recommended to clean the outside
of the cooking plate with a soft sponge or cloth dampened
with water and mild detergent.
Do not use metal tools to clean the plates.
15c
15d