Instruction Guide

10
CLEANING
Before cleaning, make sure the appliance is unplugged from the
mains. Never immerse the deep fryer in water and never place
it under running tap water (see g. 4). If water leaks into the
control unit it could cause electric shock. Check that the oil has
cooled down, then remove the control unit and drain the oil.
Remove residues from the removable bowl using a sponge or
absorbentpaper. Apart from the control unit, power cable and
heating element, all other parts are dishwasher safe (see g.5).
Never use abrasive pads as they would ruin the deep fryer. Af-
ter cleaning, carefully dry all parts to preventsplashes of hot oil
during operation.
TROUBLESHOOTING
Problem Cause How to solve
Power cord does not stay on the product Wrongside Try to rotate the plug as g. 8
Product does not turn on
Plug not inserted Insert the plug as shown on g. 8
The control panel is not insert well Fully insert the control panel
Product work without oil or has been
covered
Press the button ‘RESET’ as shown at g. 1
Product does not start the frying process Time did not set up Set up the timer as mention on page 7