instructions DEHUMIDIFIER DD Series 5714810461/04.
Description of Appliance The following terms are used throughout the instruction manual 7 4 1 4 8 5 9 6 2 3 11 10 DESCRIPTION/ACCESSORIES 1. Control panel 2. Water level viewing window 3. Condensate collection tank 4. Handles 5. Air intake grille 6. Dust filter 7. Air outlet grille 8. Drain hose to be used at the back of the unit 9. Pump tube to be used at the front of the unit 10. Connector for PUMP draining (first remove stopper) 11.
Thank you for choosing this De’Longhi dehumidifier. To get the best results from your new dehumidifier, read these instructions carefully and retain for future reference. This is the only way to ensure optimum results and maximum safety. Safety Warnings • This is an electrical appliance, it is therefore important to respect the following safety warnings: • Do not touch the appliance with wet hands. • Do not touch the plug with wet hands. • The appliance is designed and produced for domestic use only.
• Do not install the appliance in rooms containing gas, oil or sulphur. Do not install near sources of heat. • Do not use the appliance on sloping surfaces. • Keep the appliance at least 2 ft (61cm) away from flammable substances (alcohol etc) or pressurised containers (e.g. aerosol cans). • Do not rest heavy or hot objects on top of the appliance. • Always transport the appliance upright, NOT on its side. Remember to drain the condensate tank before moving the appliance.
SOME NOTIONS ON HUMIDITY Air always contains a certain amount of water in the form of vapour. This determines the level of humidity in an atmosphere. The capacity of the air to hold water vapour increases with temperature.This is why in our homes, as soon as the temperature decreases, the vapour contained in the air condenses, as is evident on the colder surfaces in the room, such as the windows, walls etc.
Fig.1 Fig.2 2 1 INSTALLATION Position the appliance in the room to be dehumidified. A free space of at least 2 ft (61 cm) must be left at the front of the dehumidifier, so as not to block the air outlet. For efficient ventilation a space of about 2-4 in (5-10 cm) should be left at the back of the appliance. The condensate can be drained in one of the following ways: A) Draining into the tank The condensate can be drained directly into the tank. The tank can be easily removed (fig.1).
CONTROL PANEL Display ON/STAND-BY Room temperature Fan speed button button °F/°C Decrease Increase humidity humidity level level button button TIMER button PUMP button DESCRIPTION OF BUTTONS 1 ON/Standby button ON/Standby button 2 "Fan" button Press this button to select the Fan Speed (MIN or MAX). 3 Room Temperature Button Temporarily displays the temperature measured in the room by the appliance.
6 Timer button If you press the TIMER button the display will show the hours after which you want the appliance to switch OFF or ON. Once the timer is set the user can no longer adjust the room humidity. Display Meaning of the codes or symbols which may be displayed: -- -- Indicates that the appliance is in standby mode. Tank warning symbol If the water tank is full, improperly positioned or missing, the tank warning light will start blinking.
humidity level. When the appliance reaches the humidity set point the appliance will automatically stop working but the fan will work at the minimum speed. As soon as the humidity increases above the set point, the appliance will automatically resume dehumidification operation. Continuous Dehumidifying Function In order to operate the continuous dehumidifying function press button “-” untill the display shows “--”. With this function the appliance will operate continuously.
CLEANING AND MAINTENANCE Always unplug the appliance from the power outlet before performing any cleaning or maintenance operations. For safety reasons, never wash the dehumidifier using a jet of water. Cleaning the cabinet • Clean the appliance using a damp cloth then dry with a dry cloth. • Do not use petrol, alcohol or solvents to clean the appliance. • Do not spray liquid insecticide or similar products as they may deform the plastic. Fig.
TROUBLESHOOTING Check the following points before contacting Customer Experience. PROBLEMS The appliance is operating in dehumidifying mode, but the humidity does not decrease. CAUSE SOLUTION The filter is blocked. Clean the filter. The temperature or humidity in the room are too low. In certain conditions, it is normal for the appliance not to dehumidify (in certain cases, it is recommended to heat the environment). The room is too big for the dehumidifying power of the appliance.
Green and Yellow to Earth Blue to Neutral ELECTRICAL REQUIREMENTS The flexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 amp capacity.Should this plug not fit the socket outlets in your home, it should be cut off and replaced with a suitable plug, follow13 amp Fuse ing the procedure outlined below.
