Operating instructions

Built-In Cabinet Installation
Parts Supplied:
The built-in cabinet shall not have a rear wall
behind the appliance.
Minimum installation height is 85cm.
Do not cover ventilation slots and air intake
points.
Page 10
Installation
Page 15
Bottom
Brackets
Screw A
Adjust Screw B
Screw C
(45)
(45)
560
550
min
450
600
+2
+8
Prepare the Cabinet
1. Read the instructions on the Bottom
Cabinet Template, put the template on the
bottom plane of the cabinet.
2. Make marks on the bottom plane of the
cabinet according to the marks “a” of the
template.
Convection
Cooking
(Without
pre-
heating function)
1. Press the “CONVECTION” key once,
“140” will flash.
2. Keep pressing “CONVECTION” or turn
“ ” to select the convection function.
Note: the temperature can be chosen
from 140 degrees to 230 degrees.
3. Press the “START/+30SEC./CONFIRM”
to confirm the
temperature
4. Turn “ ” to adjust the cooking time. (The
maximum setting time is 95 minutes.)
5. Press the “START/+30SEC./CONFIRM”
key to start cooking.
Multi-Stage Cooking
A maximum of two stages can be set. If one
stage is defrosting, it should be put in the first
stage. The buzzer will ring once
after each
stage and the next stage will begin.
Note: Auto menu and preheating cannot be
set as one of the multi-stage.
Example:
if you want to defrost the food for
5 minutes, then to cook with 80%
microwave
power for 7 minutes. The steps are as
follows:
1. Press “W.T./TIME DEFROST”
twice, the
screen will display “dEF2”.
2. Turn “ ” to adjust the defrost time to 5
minutes.
3. Press “MICROWAVE” once.
4. Turn “ ” to choose 80% microwave
power till “P80” will display.
5. Press “START/+30SEC./CONFIRM” to
confirm.
6. Turn “ ” to adjust the cooking time to 7
minutes.
7. Press “START/+30SEC./CONFIRM” to
start cooking.
Pre-set Function
1. Set the clock first. (Refer to section ‘clock
setting’.)
2. Select the cooking program. A maximum
of two stages can be set. Defrosting
should not be set in preset function. Auto
menu can be set single stage only.
Example: if you want to cook with 80%
microwave power for 7 minutes.
a) Press “MICROWAVE” once.
b) Tu r n “ ” to choose 80% microwave
power till “P80” will display.
c) Press “START/+30SEC./CONFIRM” to
confirm.
d) Tur n
“ ” to adjust the cooking time to
7 minutes.
After the above steps, please do not
press “START/+30SEC./CONFIRM”.
Then
do as follows:
3. Press “CLOCK/PRE-SET”, current time
displays and the hour figures flash.
4. Turn “ ” to adjust the hour figures, the
input time should be within 0--23 (24-
hour) or 1--12 (12-hour).
5. Press “CLOCK/PRE-SET”, the minute
figures will flash.
6. Turn “ ” to adjust the minute figures,
the
input time should be within 0--59.
7. Press “START/+30SEC./CONFIRM” to
finish setting. “:” will flash & timer
countdown begins. Buzzer will ring twice
to
indicate
cooking
time has
commenced.
Note: Clock must be set first. Otherwise,
pre-set function will not work.
Using Your Combi Oven