Installation and Operation Guide

39
GRILL HEATING ELEMENT
The heating element is self-cleaning and does not require maintenance.
OVEN FLOOR
The oven oor F (g. 42) can be
easily removed to facilitate cleaning.
Remember to replace the oor
correctly afterwards.
Be careful not to confuse the tray “L
with the oven oor “F”.
STORAGE COMPARTMENT
The storage compartment is accessible
through the pivoting panel (g. 43).
Do not store
ammable material in the storage
compartment.
L
F
Figure 43
Figure 42
Figure 44
REPLACING THE OVEN LIGHT
WARNING: Ensure the appliance is
switched off before replacing the lamp to
avoid the possibility of electric shock.
Let the oven cavity and the heating
elements to cool down.
Disconnect the appliance from the
electrical power supply.
Remove the protective cover “A” (g. 44).
Replace the halogen lamp “B” with a
new one suitable for high temperatures
having the following specications 220-
240V or 230-240V, 50Hz, and same
power (check watt power as stamped in
the bulb itself) of the replaced lamp.
IMPORTANT WARNING: Never
replace the bulb with bare hands;
contamination from your ngers can
cause premature failure.
Always use a clean cloth or gloves.
Ret the protective cover “A”.
NOTE: Oven bulb replacement is not covered
by your guarantee.
A
B
WRONG
CORRECT