Product Manual

41
AFTER CLEANING, REPLACE THE
INNER GLASS PANE
When replacing the inner glass pane, make
sure that:
• You replace the pane correctly, as
shown. The pane must be in the
position described below in order to
t into the door and to ensure that the
oven operates safely and correctly.
• You take extra care not to bump the
edges of the glass against any object
or surface.
• You do not force the pane into place.
If you are experiencing difculties
replacing the pane, remove it and start
the process again from the beginning.
 If this still does not help, call Customer
Care.
To reassemble the inner pane of the oven
door operate as follows:
1. Make sure the door is locked open
(see g. 40).
2. Replace the inner pane:
• Check that the four rubber pads are in
place (“D” in g. 43).
 IMPORTANT: It is advisable, while
retting the glass, to keep pressed in
position the four rubber pads “D”, by a
nger, to avoid breakage or slippage of
the rubber pads themselves (g. 44).
• Check that you are holding the pane
the correct way. You should be able to
read the wording on it as it faces you.
• Insert the pane in the left “E” and right
“F” slide guides (g. 44), and gently
slide it to the retainers “H” (g. 45).
• Gently push the glass retainer back
into place. You should be able to
hear the tabs on both sides click as
they lock the glass retainer in (g.
46). Please take special care to
reassemble it correctly: if correctly
tted, the descending section shall be
towards the inside of oven.
3. Unlock the oven door by opening it
completely and closing the lever “A”
on the left and right hinges (g. 47).
H
D
F
E
Click
Click
A
Figure 43
Figure 44
Figure 45
Figure 46
Figure 47