Installation and Operation Guide
30
Figure 25
REPLACING THE OVEN LIGHTS
WARNING: Ensure the appliance is switched off before replacing the lamp to avoid
the possibility of electric shock.
■ Let the oven cavity and the heating elements to cool down.
■ Switch off the electrical supply.
■ Remove the protective cover “A” (g. 25).
■ Replace the halogen lamp “B” with a new one suitable for high temperatures having
the following specications 220-240V or 230-240V, 50Hz and same power (check watt
power as stamped in the bulb itself) of the replaced lamp.
IMPORTANT WARNING: Never replace the bulb with bare hands; contamination
from your ngers can cause premature failure.
Always use a clean cloth or gloves.
■ Ret the protective cover “A”.
NOTE: Oven bulb replacement is not covered by your guarantee.
B B
A
A
WRONG
CORRECT