User Manual

25
Figure 25
SEMI - AUTOMATIC COOKING
This function is only used to set the END of the cooking time of the oven. There are
two ways of setting this function.
1. Set the length of the cooking time by pushing the button and the
button to advance, or to go backwards (Fig. 24). This sets the desired “stop”
time.
or
2.Set the end of the cooking time by pushing the button and the
button to advance, or to go backwards if you have passed the desired time
(Fig. 25).
AUTO and the symbol will be on.
Then set the temperature and the cooking program using the oven switch and
thermostat knob (see relevant sections for details).
The oven is now set to turn on and off at the programmed times.
During cooking, the symbol remains on and by pressing the button you
can see the time that remains till the end of the cooking.
The cooking time can be cancelled at any time by pushing the button.
At the end of the cooking, the symbol will turn off, the AUTO will flash and a
buzzer will sound. The buzzer can be cancelled by pressing any of the buttons.
Turn the temperature and thermostat knobs to zero and set the programmer to
“manual” by pressing the button.