Operating instructions

17
Fig. 6.1
Burners
They can be removed and washed with soapy water only.
They will remain always perfect if cleaned with products used for silverware.
After each cleaning, make sure that the burner-caps, as well as the burners, have been well
wiped off and CORRECTLY POSITIONED.
It is essential to check the correct position of the burner-caps as the least displacement from
the housing may cause serious problems.
Special attention has to be paid in order not to exchange the housing of the
two small burners shown in fig. 6.1. The burner caps can be interchangeable.
Check also that the electrodes for ignition be always clean in order to ensure a regular
spark shooting.
Burner-cap ring
partially drilled
Burner-cap ring
fully drilled
Changing the oven light
1. Disconnect the electrical power supply (for example, by switching off the main power
switch).
2. Unscrew the light cover
3. Fit a new bulb.
4. Refit the cover.
Note:
Use only bulbs designed to resist up to 300°C with the following characteristics: 15 W, 230
V, type E-14.
Oven bulb replacement is not covered by your guarantee.