Operating instructions

29
Conversion to LPG
Injectors replacement of top burners
To replace the injectors it is necessary to lift the hobtop and proceed as follows:
– Remove pan-supports and burners from the hobtop.
– Remove the backguard “E”.
– Unscrew the screws “B” and remove the sockets and the side trims (Fig. 8.3).
– Unscrew the screw “C”.
– Pull forwards the hobtop to release it, then lift following arrow “E” (Fig. 8.3)
– Hold the hobtop open by a support.
– Fully raise the adjusting air tube A (fig. 8.4) in order to easily reach the injector.
– By an angle 7 spanner, remove the injector from its housing and replace it by the proper
one according to the kind of gas (see “Table for the choice of the injectors” - page 31).
B
B
E
C
E
E
Fig. 8.3