5713232491/10.16 De’Longhi Appliances via Seitz, 47 31100 Treviso Italy www.delonghi.
ECAM35X.35 BEAN TO CUP ESPRESSO AND CAPPUCCINO MACHINE Instruction for Use Instruction videos available at: http://ecam35035.delonghi.
EN page 6 B1 B B3 B2 B4 B6 B5 B7 B8 B9 B10 B11 B12 B13 C C5 C1 C2 C3 C4 2
A2 A A1 A5 A24 A3 A23 B A4 A6 A22 A8 A20 A21 A19 A9 A7 A10 A11 A12 A16 A13 A14 A17 A15 A18 3
3A 1 2 3B 4 5 6 7 8 OK HOT MILK NO 9 10 11 13 14 15 4 12 16
17 19 18 21 PU SH PU SH 22A 23 22B A 20 24 B 28 B 1,8l 25 A 26 27 30 31 0,5 L 29 5 32
CONTENTS 1. FUNDAMENTAL SAFETY WARNINGS..............7 2. SAFETY WARNINGS ....................................8 13.4 13.5 13.6 13.7 13.8 13.9 2.1 Symbols used in these instructions................8 2.2 Designated use...............................................8 2.3 Instruction for Use..........................................8 14. DESCALING............................................... 17 15. SETTING WATER HARDNESS....................... 18 3. INTRODUCTION...........................................
1. FUNDAMENTAL SAFETY WARNINGS • • • • • • The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
2. SAFETY WARNINGS 2.1 Symbols used in these instructions Any other use is considered improper and thus dangerous. The manufacturer is not liable for damage deriving from improper use of the appliance. Important warnings are identified by these symbols. It is vital to respect these warnings. 2.3 Danger! Failure to observe the warning may result in life threatening injury by electric shock. Important! Failure to observe the warning could result in injury or damage to the appliance.
4. DESCRIPTION 4.1 Description of the appliance B11. : Doppio+ : Beverage selection menu (other than directly selected beverages): Espresso Lungo, Ristretto, Steam, 2 Espresso, 2 Espresso Lungo, 2 Ristretto. B13. : My beverages selection menu. Unless previously programmed from the settings menu (“8.5 Program My beverages”), the beverage is programmed directly the first time you use the appliance. B12. (page 3 - A) A1. Beans container lid A2. Pre-ground coffee funnel lid A3. Beans container A4.
If the power socket does not match the plug on the appliance, have the socket replaced with a suitable type by a qualified professional. During rinsing, a little hot water comes out of the coffee spouts (A19) and is collected in the drip tray (A15) underneath. Avoid contact with splashes of water. 5.4 • Setting up the appliance To turn the appliance on, press the button (A23) (fig. 5). The message "Heating Please wait" appears on the display (B1).
• 8.1 - Energy saving, - Beep, - Default beverages, - Default values; Statistics. To select the operation you require, proceed as follows: 1. Press (B5) to enter the "Settings" menu; 2. Press the selection arrows (B2 and B4) until "Maintenance" is displayed between the two dotted lines; 3. Press OK (B3) to confirm; 4. Press the selection arrows to display the operation to be performed; 5. Press OK to confirm and perform the operations as described in the corresponding sections.
3. Press OK (B3) to confirm and select the required item with the selection arrows. Then follow the instructions for each setting. The display goes back to the previous screen. • Default beverages: Use this function to reset the default values for all the beverages, or the individual beverages programmed previously. Select the beverage, then proceed as follows: 4. Select "All" to reset the aroma and quantity settings to the default values, or select the required beverage, then press OK; 5.
If the coffee is delivered too slowly or not at all, turn one click clockwise towards 7. For fuller bodied creamier coffee, turn one click anticlockwise towards 1 (do not turn more than one click at a time otherwise the coffee could be delivered a drop Beverages with coffee selectable from the (B12) at a time). These adjustments will only be evident after at least 2 cups of coffee have been delivered. If this adjustment does not obtain the desired result, turn the dial another click. 9.
EXTRA LIGHT Espresso Lungo Ristretto ≃ 30 ml 5. Preparation begins. The beverage selected appears on the display together with a progress bar which gradually fills as preparation proceeds. LIGHT MEDIUM STRONG + + + + + • 9.5 • • Important! Making LONG coffee : Halfway through preparation, the message "Add pre-ground coffee" appears on the display (B1). Add one level measure of pre-ground coffee and press OK (B3). X-STRONG (see “9.
the milk a creamy frothy appearance and making it more voluminous; 9. For a creamier froth, rotate the container with slow movements in an upward direction; 10. When the required temperature is obtained, interrupt steam delivery by pressing the selection arrow corresponding to "STOP". 11. “ ” PROGRAMMING AND SELECTING In you can select beverages customised to your personal tastes.
13. CLEANING 13.1 Cleaning the machine To clean (with the machine on): • Remove the drip tray (A15) (fig. 19), empty and clean. • Empty the grounds container (A11) and clean thoroughly to remove all residues left on the bottom. • Check the condensate tray (A10) (red) and empty if necessary.
2. Remove the filter (C4) (if present) and rinse with running water; 3. Replace the filter (if provided), fill the tank with fresh water and replace the tank; 4. (Models with water softener filter only) Deliver about 100ml of water. 9. Close the infuser door; 10. Put the water tank back. 14. DESCALING • 13.7 Cleaning the coffee spouts • 1. Clean the coffee spouts (A19) regularly with a sponge or cloth (fig. 22A); 2. Check that the holes in the coffee spouts are not blocked.
coffee spouts. A series of rinses and pauses is performed automatically to remove all the scale residues inside the coffee machine; After about 35 minutes, descaling stops; 11. "Rinse tank and fill with water": the appliance is now ready to rinse with fresh water. Empty the container used to collect the descaler solution. Extract the water tank, empty, rinse under running water, fill with fresh water up to the MAX level and put back in the appliance. Press OK; 12. "Place 1.
7. "Hot water, Confirm?": Position a container under the cappuccino maker (A20) (min. capacity: 500ml), then press OK; 8. The appliance begins hot water delivery and the message "Please wait" is displayed; 9. After the flow of hot water stops, the appliance automatically resets to "Ready for coffee" status. The new filter is now active and you can use the coffee machine. Please note The filter lasts about two months if the appliance is used normally.
19. DISPLAYED MESSAGES DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY Fill tank Insufficient water in the tank (A17). Fill the tank with water and/or insert it correctly, pushing it as far as it will go until it clicks into place (fig. 3B). Insert tank The tank (A17) is not correctly in place. Insert the tank correctly and press as far as it will go (fig. 3B). Empty grounds container The grounds container (A11) is full. Empty the grounds container and drip tray (A15), clean and replace.
Water circuit empty Fill water circuit Hot water Confirm? The water circuit is empty. Press OK (B3) and deliver water from the cappuccino maker (A20) until it flows out normally. If the problem persists, make sure the water tank (A17) is fully inserted. Descale ESC to cancel OK to descale (∼45 minutes) The machine must be descaled. The descaling procedure described in section “14. Descaling” needs to be performed. Replace filter ESC to cancel OK to replace The water softener filter (C4) is exhausted.
20. TROUBLESHOOTING Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact Customer Services. PROBLEM POSSIBLE CAUSE REMEDY The coffee is not hot. The cups were not preheated. Warm the cups by rinsing them with hot water (Please note: you can use the hot water function). The internal circuits of the appliance have Before making coffee, heat the infuser by cooled down because 2/3 minutes have performing a rinse cycle (see section “8.
The frothed milk has large The milk is not cold enough or is not You should ideally use skimmed or semibubbles semi-skimmed skimmed milk at refrigerator temperature (about 5°C). If the result is not as you wished, try changing brand of milk. The milk is not frothed The cappuccino maker (A20) is dirty Clean as described in section “10.2 Cleaning the cappuccino maker after use”. The ring on the cappuccino maker (A21) is in Push the ring into the “CAPPUCCINO” position the “HOT MILK” position. (fig. 11).
