Technical data

23
DISPLAYED MESSAGE POSSIBLE CAUSE SOLUTION
INSERT GROUNDS CONTAINER
After cleaning, the grounds container has not been
replaced.
Open the service door, remove the drip tray and insert the
grounds container.
ADD PREGROUND COFFEE
The “pre-ground coee” function has been selected
without placing any pre-ground coee in the funnel.
Place pre-ground coee in the funnel or deselect the
“pre-ground” function.
The funnel (A8) is blocked. Empty the funnel with the help of the cleaning brush as
described in the section “Cleaning the pre-ground coee
funnel”.
Descale
The machine must be descaled. The descaling procedure described in the “Descaling”
section needs to be performed as soon as possible.
Replace water lter
The water lter is exhausted. Replace the lter or remove it as described in the section
“Water lter”.
LESS COFFEE
Too much coee has been used. Select a milder taste or reduce the quantity of pre-ground
coee.
FILL BEANS CONTAINER
The coee beans have run out. Fill the beans container
The pre-ground coee funnel is clogged. Empty the funnel with the help of the brush as described in
the section “Cleaning the pre-ground coee funnel”.
INSERT INFUSER ASSEMBLY
The infuser has not been replaced after cleaning. Insert the infuser as described in the paragraph “Cleaning
the infuser”.
INSERT MILK CONTAINER
The milk container is not inserted correctly. Insert the milk container as far as it will go.
TURN DIAL TO CLEAN
After preparing a milk drink, the lid must be cleaned with
the CLEAN function.
Turn the froth adjustment dial to CLEAN
TURN FROTH ADJUSTMENT
DIAL
The froth adjustment dial in not in correct position. Turn the froth adjustment dial in one of the froth position.