Operation Manual

10
Rinsing
Use this function to deliver hot water from the spout to heat the internal
circuit and make the coee delivered hotter.
To enable the function, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (g. 8) until
“Rinsing” is displayed;
3. Press the button. The message “Conrm?” is
displayed;
3. Press the button (g. 3). Hot water ows out of
the spout, heating the internal circuit and making the
coee delivered hotter.
Descale
For instructions on descaling, see page 17.
Adjust time
To adjust the time on the display, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (g. 8) until
“Adjust time” is displayed;
3. Press the button (g. 3);
4. Press the MILK or CAPPUCCINO button (g. 8) to change
the hours;
5. Press the button to conrm;
6. Press the MILK or CAPPUCCINO button (g. 8) to change
the minutes;
7. Press the button to conrm.
This sets the time. Press the MENU/ESC button to exit the
menu.
Auto-o
The appliance is set to turn o automatically if not used for 2
hours.
The time can be changed so that the appliance switches o
after 15 or 30 minutes, or after 1, 2 or 3 hours.
To re-programme Auto-o, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (g. 8) until
“Auto-o” is displayed;
3. Press the button;
4. Press the MILK or CAPPUCCINO button (g. 8) until the
desired operation time is displayed (15 or 30 minutes, or
1, 2 or 3 hours);
5. Press the button to conrm;
6. Press the MENU/ESC button to exit the menu.
Auto-o is programmed.
Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coee immediately.
Please note!
To enable this function, the time must already have been set
correctly.
To enable Auto-on, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (g. 8) until
“Auto-start” is displayed;
3. Press the button. “Enable?” is displayed;
4. Press the button to conrm;
5. Press the MILK or CAPPUCCINO button to choose the
hours;
6. Press the button to conrm;
7. Press the MILK or CAPPUCCINO button (g. 8) to change
the minutes;
8. Press the button to conrm;
9. Press the MENU/ESC button to exit the menu.
Once the time has been conrmed, enabling of auto-start is
indicated by the symbol displayed alongside the time
and under the Auto-start item in the menu.
To disable the function:
1. Select auto-start from the menu;
2. Press the button. “Disable?” is displayed;
3. Press the button to conrm.
The symbol is no longer displayed.
Setting the temperature
To modify the temperature of the water used to make the
coee, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (g. 8) until “Set
temperature” is displayed;
3. Press the button;
4. Press the MILK or CAPPUCCINO button until the required
temperature (●= low, ●●●● = high) is displayed;
5. Press the button to conrm;
6. Press the MENU/ESC button to exit the menu.
Energy Saving
Use this function to enable or disable energy saving mode.
When enabled, the function reduces energy consumption in
compliance with European regulations.
To disable (or enable) “energy saving” mode, proceed as
follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the MILK or CAPPUCCINO button (g. 8) until
“Energy saving” is displayed;
3. Press the button. “Disable?” is displayed (or