Instruction Manual

22
The coee is delivered too
slowly or a drop at a time.
The coee is ground too nely. Turn the grinding adjustment dial (A2) one
click clockwise towards “7” while the coee
mill is in operation (g. 10).
Continue one click at a time until coee delive-
ry is satisfactory.
The eect is only visible after delivering 2
coees (see section “10.3 Adjusting the coee
mill”).
Coee does not come out of
one or both of the spouts.
The coee spouts (A13) are blocked. Clean the spouts with a toothpick.
Milk is not delivered from the
milk spout.
Milk is not delivered from the milk spout The
milk container lid (D2) is dirty.
Clean the milk container lid as described in sec-
tion “14.10 Cleaning the milk container”.
The milk contains large bub-
bles and squirts out of the milk
spout or there is little froth.
The milk is not suciently cold or
semi-skimmed.
Use skimmed or semi-skimmed milk at refrige-
rator temperature (about 5° C). If the result is
not as you wished, try changing brand of milk.
The froth adjustment dial (D1) is incorrectly
adjusted.
Adjust according to the instructions in section
“11.2 Adjusting the amount of froth”
The milk container lid (D2) or froth adjustment
dial (D1) is dirty.
Clean the milk container lid and dial as de-
scribed in section “14.10 Cleaning the milk
container”.
The hot water/steam connection nozzle (A19)
is dirty.
Clean the connection nozzle as described in
section “14.11 Cleaning the hot water/steam
connection nozzle”.
The appliance does not come
on.
It is not plugged into the mains socket. Plug into the mains socket.
The main switch (A8) is not turned on. Press the main switch (g. 1).
The infuser cannot be ex-
tracted .
The appliance has not been turned o
correctly.
Turn the appliance o by pressing the
button (see section “7. Turning the appliance
o”).