Instruction Manual

9
4. DESCRIPTION
4.1 Description of the appliance
(page 3 - A )
A1. Control panel
A2. Grinding adjustment dial
A3. Cup shelf
A4. Beans container lid
A5. Pre-ground coee funnel lid
A6. Pre-ground coee funnel
A7. Beans container
A8. Main switch
A9. Power cord connector socket
A10. Water tank
A11. Infuser door
A12. Infuser
A13. Coee spouts (adjustable height)
A14. Coee grounds container
A15. Condensate tray
A16. Cup tray
A17. Drip tray water level indicator
A18. Drip tray
A19. Hot water/steam connection nozzle
4.2 Description of the control panel
(page 2 - B )
A number of buttons on the panel have a double function. This is
indicated in brackets in the description.
B1. Display: guides the user in using the appliance
B2. button: turns the appliance on and o
B3. MENU button to access the menu (when in the settings
MENU: “ESC” button to exit from the selected function and go
back to the main menu)
B4. button: to deliver steam to make cappuccino and
milk-based coees (when in the settings MENU: < button
to scroll backwards)
B5. button: to rinse the appliance (when in the settings
MENU: > button to scroll forwards)
B6. button: to make coee using pre-ground coee
(when in the settings MENU: “OK” button to conrm the cur-
rent selection)
B7. aroma selection button: to select the coee
taste
B8. button: to make 1 cup of short espresso coee
B9. button: to make 2 cups of short espresso coee
B10. CAPPUCCINO button: to make 1 cup of cappuccino or
frothed milk
B11. button: to make 1 cup of long espresso coee
B12. button: to make 2 cups of long espresso coee
4.3 Description of the accessories
(page 2 - C )
C1. Indicator paper
C2. Measure
C3. Descaler
C4. Water softener lter
C5. Brush
C6. Hot water spout
C7. Power cord
4.4 Description of the milk container
(page 3 - D )
D1. Froth adjustment dial
D2. Milk container lid
D3. Milk container
D4. Milk intake tube
D5. Frothed milk spout (adjustable)
5. BEFORE USE
5.1 Checking the appliance
After removing the packaging, make sure the product is com-
plete and undamaged and that all accessories are present. Do
not use the appliance if it is visibly damaged. Contact De’Longhi
Customer Services.
5.2 Installing the appliance
Important!
When you install the appliance, you should respect the follow-
ing safety warnings:
• The appliance gives o heat. After positioning the appli-
ance on the worktop, leave a space of at least 3 cm be-
tween the surfaces of the appliance and the side and rear
walls and at least 15 cm above the machine.
• Water penetrating the coee maker could cause damage.
Do not place the appliance near taps or sinks.
• The appliance could be damaged if the water it contains
freezes.
Do not install the appliance in a room where the tempera-
ture could drop below freezing point.
• Arrange the power cord (C7) in such a way that it cannot be
damaged by sharp edges or contact with hot surfaces (e.g.
electric hot plates).
5.3 Connecting the appliance
Important!
Check that the mains power supply voltage corresponds to that
indicated on the rating plate on the bottom of the appliance.
Connect the appliance to an eciently earthed and correctly
installed socket with a minimum current rating of 10A only.