Instruction Manual

11
which remains as set).
1. Press the MENU button to enter the menu;
2. Press the or button until “Default values” is dis-
played;
3. Press the button;
4. The message “Conrm?” is now displayed.
5. Press the button to conrm and exit.
Statistics function
This displays statistics relating to the machine. To display, pro-
ceed as follows:
1. Press the MENU button to enter the menu;
2. Press the or button until “Statistics” is dis-
played;
3. Press the button;
4. By pressing the or button you can check:
- how many coees have been made;
- how many times the machine has been descaled;
- the total number of litres of water delivered;
- how many times the water lter has been replaced;
- how many cappuccinos and milk based drinks have been
made (CAPPUCCINO).
5. Press then the button twice to exit the menu.
MAKING COFFEE
Selecting the coee taste
The appliance is set by default to make coee with a standard
taste.
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the button (g. 7) repeat-
edly until the required taste is displayed.
Selecting the quantity of coee in the cup
The appliance is set by default to automatically deliver the fol-
lowing quantities of coee:
- short coee (≃40ml) when the button is pressed;
- long coee (≃120ml) when the button is pressed;
- two short coees when the button is pressed;
- two long coees when the button is pressed.
To change the quantity of coee the appliance delivers auto-
matically into the cup, proceed as described below:
- press and hold the button corresponding to the quantity
to be modied until “Program quantity” is displayed, then
release the button;
- when the coee in the cup reaches the required level, press
the same button again to memorise the new amount.
The machine is now reprogrammed with the new quantities.
Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
However, if after making the rst few coees you nd that the
coee is either too weak and not creamy enough or delivery
is too slow (in drops), this can be corrected by adjusting the
grinding adjustment dial (g. 8).
Please note :
The grinding adjustment dial must only be turned when the
coee mill is in operation.
If the coee is delivered too slowly or
not at all, turn one click clockwise.
For fuller bodied creamier coee,
turn one click anticlockwise (do not
turn more than one click at a time
otherwise the coee could be delive-
red in drops).
These adjustments will only be evident after at least 2 cups of
coee have been delivered.
If this adjustment does not obtain the desired result, turn the
dial another click.
Tips for a hotter coee
For hotter coee, you should:
• before delivering the coee, perform a rinse cycle by
pressing the button. Hot water is delivered from the
spout, heating the internal circuits of the appliance and
thus raising the coee temperature.
• warmthecupsbyrinsingthemwithhotwater(usingthe
hot water function);
• increase the coee temperature in the settings menu
(page 10).
Making coee using coee beans
Important!
Do not use caramelised or candied coee beans as they could
stick to the coee mill and damage it.
1. Fill the container with coee beans (g. 9).
2. Place under the coee spouts:
- 1 cup, if you want 1 coee (g. 10);
- 2 cups, if you want 2 coees (g. 11).
3. Lower the spouts as near as possible to the cup. This makes
a creamier coee (g. 12).
4. Press the button corresponding to the required coee.