User Manual
17
16.2 Setting water hardness
1. Make sure the appliance is o (but connected to the
mains electricity supply and with the main switch in the
I position);
2. Press and hold the button (B5) for at least 5 sec-
onds. The and lights come on together;
3. Press the button (B3, on the left of the dial) to set the
actual water hardness as measured by the indicator paper.
Level Level Level Level
1 234
4. Press the button (B8, on the right of the dial) to
conrm the selection.
The machine is now reprogrammed with the new water hard-
ness setting.
17. TECHNICAL DATA
Voltage: 220-240 V~ 50/60 Hz max. 10A
Absorbed power: 1450 W
Pressure: 1.5 MPa (15 bars)
Max. water tank capacity: 1.8 L
Size LxDxH: 240x430x350 mm
Cord length: 1150 mm
Weight: 8.9 kg
Max. beans container capacity: 250 g
This product is compliant with Regulation (EC) No.
1935/2004 on materials and articles intended to come
into contact with food.
18. DISPOSAL
The appliance must not be disposed of with house-
hold waste, but taken to an authorised waste separa-
tion and recycling centre.
Level 1
Level 2
Level 3
Level 4
19. EXPLANATION OF LIGHTS
LIGHT DISPLAYED POSSIBLE CAUSE REMEDY
The hot water/steam dial must be
turned (A19)
Turn the hot water/steam dial.
FLASHING
Insucient water in the tank (A9). Fill the tank with water and/or insert it correct-
ly, pushing it as far as it will go until it clicks
into place.
The tank (A9) is not correctly in
place.
Insert the tank correctly and press as far as it
will go.