Instruction Manual

11
Please note!
• When in energy saving mode, a few seconds may elapse
before the rst coee is delivered as the appliance must
heat up again.
• To prepare any drink, press any button to exit energy sav-
ing, then press the button corresponding to the drink you
want to make.
Setting the temperature
To modify the temperature of the water used to make the coee,
proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (g. 9) until “Set temperature” is displayed;
3. Press the button;
4. Press < or > until the required temperature (●=low;
●●●●=maximum) is displayed;
5. Press the button to conrm;
6. Then press the MENU/ESC button to exit the menu.
Setting water hardness
For instructions on setting water hardness, see page 17.
Setting the language
To modify the language of the display, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (g. 9) until “Set language” is displayed;
3. Press the button;
4. Press < or > until the required language is displayed;
5. Press the button to conrm;
6. A message conrming the language installed is displayed;
7. Then press the MENU/ESC button to exit the menu.
Beep
This enables or disables the beep emitted by the appliance
whenever a button is pressed or an accessory is inserted/
removed.
To disable or re-enable the beep, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (g. 9) until “Beep” is displayed.
3. Press the button: “Disable?” is displayed (or “Ena-
ble?” if disabled);
4. Press the button to enable or disable the beep;
5. Press the MENU/ESC button to exit the menu.
Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (g. 9) until “Default values” is displayed;
3. Press the button;
4. “Conrm?” is displayed;
5. Press the button to conrm and exit.
Statistics function
This displays statistics relating to the machine.
To display, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press < or > (g. 9) until “Statistics” is displayed;
3. Press the button;
4. Press < or > (g. 9) to verify:
- how many coees have been made;
- the total number of litres of water delivered.
- how many times the machine has been descaled.
- how many times the water softener lter has been
replaced.
5. Press the MENU/ESC button twice to exit the menu.
MAKING COFFEE
Selecting the coee taste
The appliance is set by default to make coee with a standard
taste.
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the button (g. 10) repeat-
edly until the required taste is displayed.
Selecting the quantity of coee in the cup
The appliance is set by default to make a standard quantity of
coee. To select the quantity of coee, press the
button (g. 11) until the message corresponding to the required
quantity of coee is displayed:
Coee selected Quantity in cup (ml)
MY COFFEE Programmable:
from ≃20 to ≃180
SHORT
≃40
STANDARD
≃60
LONG
≃90
EXTRA LONG COFFEE
≃120