User Instructions
15
2. Press and hold the CAPPUCCINO button (B9) until the
name of the hot drink and the message “PROGRAM MILK”
is displayed.
3. Release the button. The appliance starts delivering milk.
4. Once the required quantity of milk has been delivered into
the cup, press the button again.
5. The appliance stops delivering milk and, if included in the
drink, after a few seconds the coee is delivered into the
cup. The name of the hot drink and “PROGRAM COFFEE” is
displayed.
6. Once the required quantity of coee has been delivered
into the cup, press the button again. Coee delivery stops.
The machine is now reprogrammed with the new milk and cof-
fee quantities.
Programming the quantity of coee and milk in
the cup for the MILK MENU button drinks
The appliance is set by default to automatically deliver standard
quantities. To change these quantities, proceed as follows:
1. Press the MILK MENU button (B10).
2. Press or until the required drink is displayed (MILK,
FLAT WHITE, ESPRESSO MACCHIATO or MY MILK).
3. Hold the OK button (g. 3) until the name of the drink and
“PROGRAM MILK” are displayed.
4. Release the button. The appliance starts delivering milk.
5. Once the required quantity of milk has been delivered into
the cup, press the OK button.
6. The appliance stops delivering milk and, if included in the
drink, after a few seconds the coee is delivered into the
cup. The name of the hot drink and “PROGRAM COFFEE” is
displayed.
7. Once the required quantity of coee has been delivered
into the cup, press the OK button again. Coee delivery
stops.
The machine is now reprogrammed with the new milk and cof-
fee quantities.
DELIVERING HOT WATER
Important! Danger of burns.
Never leave the machine unsupervised while delivering hot
water. The spout becomes hot. Hold by the handle only.
Please note!
If “Energy saving” mode is active, you may have to wait a few
seconds before the hot water is delivered.
Delivering hot water
1. Make sure the hot water spout is attached correctly (g. 7).
2. Place a container under the spout (as close as possible to
avoid splashes).
3. Press the button (B7). “HOT WATER” is displayed,
together with a progress bar which lls gradually as prepa-
ration proceeds.
4. The machine delivers 250 ml of hot water, then delivery
stops automatically. To interrupt delivery of hot water
manually, press the
button again.
Changing the quantity of water delivered
automatically.
The machine is set by default to automatically deliver 250 ml
of hot water.
To modify these quantities, proceed as follows:
1. Position a container under the spout.
2. Press and hold the
button (B7) until “HOT WATER Pro-
gram quantity” is displayed, then release the
button.
3. When the hot water in the cup reaches the required level,
press the
button again.
The machine is now reprogrammed with the new quantity.
CLEANING
Important!
• Do not use solvents, abrasive detergents or alcohol to clean
the appliance. With De’Longhi superautomatic coee ma-
chines, you need not use chemical products to clean the
machine.
• None of the components of the appliance can be washed in
a dishwasher with the exception of the milk container (C).
• Do not use metal objects to remove encrustations or coee
deposits as they could scratch metal or plastic surfaces.
Cleaning the coee grounds container
When “EMPTY GROUNDS CONTAINER” is displayed, the grounds
container must be emptied and cleaned.
Until the grounds container has been cleaned, the appliance will
not make coee.
Even if not full, the empty grounds container message is dis-
played 72 hours after the rst coee has been prepared. For the
72 hours to be calculated correctly, the machine must never be
turned o using the main switch.
Important! Danger of burns
If you make a number of cappuccinos one after the other, the
metal cup tray becomes hot.
Wait for it to cool down before touching it and handle it from
the front only.
To clean (with the machine on):