Instruction Manual

15
3. From the homepage, select the required quantity of water
by pressing the selector (B2) corresponding to "QUANTITY"
(B11);
4. Press the selector (B2) corresponding to the " " symbol
(B3) to enter the menu;
5. Press the selector (B2) corresponding to the "NEXT>" sym-
bol until "TEA FUNCTION" appears on the display;
6. Select the required water temperature by pressing the se-
lector corresponding to the required tea; each tea (white,
green, oolong or black) corresponds to a specic water
temperature. The corresponding image appears on the
display (B1), together with a progress bar which lls grad-
ually as preparation proceeds;
7. The machine delivers the chosen quantity of hot water,
then delivery stops automatically. To interrupt manually,
press the selector corresponding to " STOP".
Please note!
• If "Energy Saving" mode is active, you may have to wait a
few seconds before the hot water is delivered.
• The quantity of water in the cup can be customised (see
sections”12. Customising the beverages ” and “13. Mem-
orising your personal prole”).
• Delivery can be stopped at any moment by pressing “
STOP " ;
• As soon as delivery has ended, to increase the quantity of
water in the cup, just press " EXTRA". When the required
quantity is reached, press “ STOP " .
12. CUSTOMISING THE BEVERAGES
The aroma (when required) and quantity of the drinks can be
customised.
1. Make sure the prole (B4) for which you want to customise
the beverage is active. You can select "MY" beverages for
each of the 6 proles;
2. From the homepage, press the selector (B2) corresponding
to “ ” (B6);
3. Select the beverage you want to customise (a directly
selected beverage or from the beverages selection menu
- B3) to enter the customising screen. The relative accesso-
ries must be inserted;
4. (Beverages with coee only) "CHOOSE COFFEE AROMA":
Select the required aroma by pressing the selection arrows
corresponding to "-" or "+" and press the selector corre-
sponding to " OK";
5. "COFFEE (OR WATER) QUANTITY, STOP TO SAVE": Prepa-
ration begins and the appliance displays the quantity
customising screen in the form of a vertical bar. The star
alongside the bar represents the current quantity.
6. When the quantity reaches the minimum quantity you can
set, " STOP" appears on the display (B1).
7. When the required quantity is reached, press the selector
corresponding to " STOP".
8. "SAVE NEW SETTINGS?": Press the selector corresponding
to " OK" to save (or the selector corresponding to "
ESC" to cancel).
The appliance conrms if the values have been saved or not
(depending on the previous selection). Press the selector cor-
responding to " OK".
The appliance goes back to the homepage.
Please note!
• Cappuccinos and milk-based coees: the coee aroma
is saved rst, followed by the quantity of rst milk, then
coee;
• Americano: the coee aroma is saved rst, followed by
the quantity of rst coee, then hot water;
• Hot water: the appliance delivers hot water. Press the se-
lector (B2) corresponding to " STOP" to save the required
quantity.
• You can also customise the beverages by connecting with
the DeLonghi Coee Link App.
• Press " ESC" to exit programming. The values will not
be saved.
Beverage quantity table
Beverage Standard
quantity
Programmable
quantity
ESPRESSO 40 ml 20-80 ml
LONG 160 ml 115-250 ml
COFFEE 180 ml 100-240 ml
DOPPIO+ 120 ml 80-180 ml
AMERICANO 150 ml 70-480 ml
TEA 150 ml 30-420 ml
HOT WATER 250 ml 20-420 ml
13. MEMORISING YOUR PERSONAL PROFILE
The appliance allows you to memorise 6 dierent proles, each
associated with a dierent icon.
The customised "MY" beverages "AROMA" and "QUANTITY" val-
ues are saved in each prole (see section “12. Customising the
beverages ”). The order in which all the beverages are displayed
is based on the frequency of selection.
To select or enter a prole, press on the prole currently in use
(B4), press the selector (B2) corresponding to the "NEXT>" sym-
bol until the required prole is displayed, then press on the prole.
Please note!
• " GST" (GUEST) prole: select this prole to deliver bev-
erages with the default settings. The function is not
active.