Instruction Manual

22
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY
EMPTY GROUNDS CONTAINER The grounds container (A10) is full.
Empty the grounds container and drip tray
(A14), clean and replace. Important: when
removing the drip tray, the grounds contain-
er must be emptied, even if it contains few
grounds. If this is not done, when you make the
next coees, the grounds container may ll up
more than expected and clog the machine.
INSERT GROUNDS CONTAINER After cleaning, the grounds container
(A10)
has
not been replaced.
Remove the drip tray (A14) and insert the
grounds container.
ADD GROUND COFFEE MAX.
ONE MEASURE
ESC
The "pre-ground coee" function has been se-
lected without placing any pre-ground coee
in the funnel
(A4)
.
Place pre-ground coee in the funnel
(g. 13)
and repeat delivery
ADD GROUND COFFEE MAX.
ONE MEASURE
OK
A LONG coee with pre-ground coee has been
requested
Place pre-ground coee in the funnel (A4) (g.
13) and press the selector corresponding to "
OK" to continue and complete delivery.
FILL BEANS CONTAINER
ESC
The coee beans have run out. Fill the beans container
(A3) (g. 11)
.
The pre-ground coee funnel
(A4)
is clogged. Empty the funnel with the help of the brush
(C5) as described in section “14.8 Cleaning the
pre-ground coee funnel”.