Instruction Manual

27
PROBLEM POSSIBLE CAUSE REMEDY
The milk does not come out of the
milk spout (D5)
The lid (D2) of the milk container (D)
is dirty
Clean the milk container lid as described in sec-
tion “14.10 Cleaning the milk container”.
The milk contains large bubbles and
squirts out of the milk spout (D5) or
there is little froth
The milk is not cold enough or is not
semi-skimmed or skimmed.
Use skimmed or semi-skimmed milk at refrig-
erator temperature (about 5° C). If the result is
not as you wished, try changing brand of milk.
The froth adjustment dial (D1) is incor-
rectly adjusted.
Adjust following the instructions in section “8.
making cappuccinos and milk-based coees”.
The milk container lid (D2) or froth ad-
justment dial (D1) is dirty
Clean the milk container lid and froth adjust-
ment dial as described in section “14.10 Clean-
ing the milk container”.
The hot water/steam connection noz-
zle (A9) is dirty
Clean the connection nozzle as described in
section “14.11 Cleaning the hot water/steam
connection nozzle”.
The cup warmer is hot, even though it
has been disabled
A number of beverages have been pre-
pared in rapid succession
The machine emits noises or small
pus of steam while not in use
The machine is ready for use, or has re-
cently been turned o, and condensate
is dripping into the hot vaporiser
This is part of normal operation. To limit the
phenomenon, empty the drip tray.