Instruction Manual

21
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY
ADD GROUND COFFEE MAX.
ONE MEASURE
OK
A LONG coee with pre-ground coee has been
requested
Place pre-ground coee in the funnel (A4) (g.
13) and press the selector corresponding to "
OK" to continue and complete delivery.
FILL BEANS CONTAINER
ESC
The coee beans have run out. Fill the beans container (A3) (g. 11) .
The pre-ground coee funnel (A4) is clogged. Empty the funnel with the help of the brush
(C5) as described in section “12.8 Cleaning the
pre-ground coee funnel”.
GROUND TOO FINE. ADJUST
MILL
ESC
The grinding is too ne and the coee is deliv-
ered too slowly or not at all.
Repeat coee delivery and turn the grinding
adjustment dial (A5) (g. 10) one click clock-
wise towards 7 while the coee mill is in
operation. If after making at least 2 coees
delivery is still too slow, repeat the correction
procedure, turning the grinding adjustment
dial another click until delivery is correct (see
section “7.5 Adjusting the coee mill” ) . If the
problem persists, make sure the water tank
(A16) is fully inserted.
If the water softener lter (C4) is present, an
air bubble may have been released inside the
circuit, obstructing delivery.
Insert the hot water spout (C6) in the appli-
ance and deliver a little water until the ow
becomes regular.
SELECT A MILDER TASTE
OR REDUCE COFFEE
QUANTITY
ESC
Too much coee has been used. Select a milder taste by pressing the selector
(B2) corresponding to "AROMA" (B10) or re-
duce the quantity of ground coee (maximum
1 measure).