Instruction Manual
11
6.14 Customise prole
To customise the prole icon, proceed as follows:
1. Press the selector (B2) corresponding to the " " symbol
(B5) to enter the menu;
2. Scroll through the menu items by pressing the selector cor-
responding to "NEXT>"
until " CUSTOMISE PROFILE"
appears on the display;
3. Press the selector corresponding to " CUSTOMISE
PROFILE";
4. Press the selector corresponding to the icon you want to
select (press the selector corresponding to "NEXT>" to dis-
play all the icons available);
5. Press the selector corresponding to
" ESC" twice to go back to the homepage.
7. MAKING COFFEE
7.1 Selecting the coee aroma
From the homepage, select the required coee aroma by press-
ing the selector (B2) corresponding to "AROMA" (B10):
(see “7.4 Making coee
using pre-ground coee”)
EXTRA LIGHT
LIGHT
MEDIUM
STRONG
X-STRONG
Custom (if programmed) /
Standard
After delivering the beverage, the aroma setting is reset to the
value.
7.2 Selecting the coee quantity
From the homepage, select the required quantity of coee in the
cup by pressing the selector (B2) corresponding to "QUANTITY"
(B11):
SMALL SIZE
MEDIUM SIZE
LARGE SIZE
EXTRA LARGE SIZE
Custom (if programmed) /
Standard
After delivering the beverage, the quantity setting is reset to the
value.
7.3 Making coee using coee beans
Important!
Do not use green, caramelised or candied coee beans as they
could stick to the coee mill and make it unusable.
1. Fill the container (A3) (g. 11) with coee beans;
2. Place a cup under the coee spouts (A8);
3. Lower the spouts as near as possible to the cup (g. 12).
This makes a creamier coee;
4. Then select your required coee:
Directly selected beverages:
- ESPRESSO (B7)
COFFEE B8
LONG B9
Selectable from the beverage selection menu (B3):
- DOPPIO+
2X ESPRESSO
5. Preparation begins. An image of the selected beverage
appears on the display (B1) together with a progress bar
which gradually lls as preparation progresses.
Please note:
You can prepare 2 cups of ESPRESSO coee at the same time by
also pressing the selector corresponding to "2X "
during preparation of 1 ESPRESSO (the image is displayed
for a few seconds at the start of preparation).
• While the machine is making coee, delivery can be inter-
rupted at any moment by pressing the selector (B2) corre-
sponding to " STOP".
• As soon as delivery has ended, to increase the quantity of
coee in the cup, just press the selector (B2) correspond-
ing to " EXTRA". When the required quantity is reached,
press the selector corresponding to " STOP".
Once the coee has been made, the appliance is ready to make
the next beverage.
Please note!
• Various alarm messages could be displayed while using
the appliance (FILL TANK, EMPTY GROUNDS CONTAINER,
ETC.). Their meaning is explained in section “17. Displayed
messages”.
• For hotter coee, see section “5.1 Tips for a hotter coee”.
• If the coee is delivered a drop at a time, too weak and not
creamy enough or too cold, read the tips in section “7.5 Ad-
justing the coee mill” and section “18. Troubleshooting”.