Instruction Manual

13
Please note!
• For a denser more even froth, you must use skimmed or
partially skimmed milk at refrigerator temperature (about
5°C).
• If "Energy Saving" mode is enabled, you may have to wait
a few seconds before the beverage is delivered.
3. Make sure the milk intake tube (D4) is correctly inserted in
the bottom of the milk container lid (g. 16);
4. Place the lid back on the milk container;
5. If present, remove the hot water/steam spout (C6) (g. 17);
6. Attach the milk container (D) to the connection nozzle (A9)
(g. 18) and push as far as it will go. The machine emits a
beep (if the beep function is enabled);
7. Place a suciently large cup under the coee spouts (A8)
and frothed milk spout (D5). Adjust the length of the milk
spout. To move it nearer the cup, simply pull it downwards
(g. 19).
8. Follow the instructions below for each function.
8.2 Adjusting the amount of froth
Turn the froth adjustment dial (D1) to adjust the amount of froth
on the milk delivered while making cappuccinos and milk-based
coees.
Dial
position
Description Recommended for…
NO FROTH HOT MILK (not frothed) /
CAFFELATTE
MIN. FROTH LATTE MACCHIATO /
FLAT WHITE
MAX. FROTH CAPPUCCINO / CAPPUCCI
NO+ / CAPPUCCINO MIX
/ ESPRESSO MACCHIATO /
HOT MILK (frothed)
8.3 Making cappuccinos and milk-based coees
automatically
1. Fill the milk container (D) and attach it as described above.
2. Select the required beverage:
Directly selected beverages:
• CAPPUCCINO (B10)
• LATTE MACCHIATO B11)
• HOT MILK (B12)
Selectable from the beverage selection menu (B3):
• CAPPUCCINO+
• CAPPUCCINO MIX
• CAFFELATTE
• FLAT WHITE
• ESPRESSO MACCHIATO
3. A message on the display (B1) instructs you to turn the
froth adjustment dial (D1) according to the froth required
by the original recipe. Turn the dial on the milk container
lid (D2).
4. After a few seconds, preparation begins automatically and
an image of the selected beverage appears on the display,
together with a progress bar which gradually lls as prepa-
ration progresses.
Please note: general indications when preparing all milk-
based beverages
• “ ESC”: press to interrupt preparation completely and
go back to the homepage.
• "STOP ": press to interrupt milk or coee delivery and
move on to the next delivery (if applicable) to complete the
beverage.
• At the end of delivery, to increase the quantity of coee in
the cup, press " EXTRA".
• Preparation of each coee can be customised (see sec-
tions”10. Customising the beverages ” and “11. Memoris-
ing your personal prole”).
• Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.
Once the coee has been made, the appliance is ready to make
the next drink.
8.4 Cleaning the milk container after use
Each time you use a milk function, "TURN MILK FROTH ADJUST-
MENT DIAL TO CLEAN POSITION" appears on the display and the
milk frother lid must be cleaned:
1. Leave the milk container (D) in the machine (you do not
need to empty it);
2. Place a cup or other recipient under the frothed milk spout
(g. 21);
3. Turn the froth adjustment dial (D1) to "CLEAN" (g. 20).
"CLEANING UNDERWAY RECIPIENT UNDER SPOUT" appears
on the display (B1) together with a bar which gradually
lls as cleaning progresses. Cleaning stops automatically;
4. Turn the dial back to one of the froth selections;
5. Remove the milk container and always clean the steam
connection nozzle (A9) with a sponge (g. 22).
Please note!
• To prepare a number of cappuccinos or milk-based coees,
clean the milk container after you have prepared the last
beverage only. To proceed with making the next beverag-
es, when the "CLEAN message is displayed, press the selec-
tor corresponding to “ ESC”.
If you do not clean the milk container, the symbol appears
on the display to remind you that it needs cleaning.
• The milk container can be kept in the refrigerator.
• In some cases, before cleaning you must wait for the appli-
ance to heat up.