Instruction Manual

14
9. DELIVERING HOT WATER
1. Make sure the hot water spout (C6) is attached correctly to
the hot water connection nozzle (A9);
2. Place a container under the spout (as close as possible to
avoid splashes);
3. Press the selector (B2) corresponding to the " " symbol
(B3) to enter the menu;
4. Press the selector corresponding to the "NEXT>" symbol
until "HOT WATER" is displayed;
5. Press the selector corresponding to " HOT WATER". The cor-
responding image appears on the display (B1), together
with a progress bar which lls gradually as preparation
proceeds;
6. The machine delivers hot water, then delivery stops auto-
matically. To interrupt hot water delivery manually, press
the selector corresponding to " STOP" again.
Please note!
• If "Energy Saving" mode is active, you may have to wait a few
seconds before hot water is delivered.
• Preparation of each coee can be customised (see sec-
tions”10. Customising the beverages ”and “11. Memoris-
ing your personal prole”).
10. CUSTOMISING THE BEVERAGES
The aroma (when required) and quantity of the drinks can be
customised.
1. Make sure the prole (B4) for which you want to customise
the beverage is active. You can select "MY" beverages for
each of the 3 proles;
2. From the homepage, press the selector (B2) corresponding
to “ ” (B6);
3. Select the beverage you want to customise (a directly
selected beverage or from the beverages selection menu
- B3) to enter the customising screen. The relative accesso-
ries must be inserted;
4. (Beverages with coee only) "CHOOSE COFFEE AROMA":
Select the required aroma by pressing the selection arrows
corresponding to "-" or "+" and press the selector corre-
sponding to " OK";
5. "COFFEE (OR WATER) QUANTITY, STOP TO SAVE": Prepa-
ration begins and the appliance displays the quantity
customising screen in the form of a vertical bar. The star
alongside the bar represents the current quantity.
6. When the quantity reaches the minimum quantity you can
set, " STOP" appears on the display (B1).
7. When the required quantity is reached, press the selector
corresponding to " STOP".
8. "SAVE NEW SETTINGS?": Press the selector corresponding
to " OK" to save (or the selector corresponding to "
ESC" to cancel).
The appliance conrms if the values have been saved or not
(depending on the previous selection). Press the selector cor-
responding to " OK".
The appliance goes back to the homepage.
Please note!
• Cappuccinos and milk-based coees: the coee aroma
is saved rst, followed by the quantity of rst milk, then
coee;
• Hot water: the appliance delivers hot water. Press the se-
lector (B2) corresponding to " STOP" to save the required
quantity.
• You can also customise the beverages by connecting with
the DeLonghi Coee Link App.
• Press " ESC" to exit programming. The values will not
be saved.
Beverage quantity table
Beverage Standard
quantity
Programmable
quantity
ESPRESSO 40 ml 20-80 ml
LONG 160 ml 115-250 ml
COFFEE 180 ml 100-240 ml
DOPPIO+ 120 ml 80-180 ml
HOT WATER 250 ml 20-420 ml
11. MEMORISING YOUR PERSONAL PROFILE
The appliance allows you to memorise 3 dierent proles, each
associated with a dierent icon.
The customised "MY" beverages "AROMA" and "QUANTITY" val-
ues are saved in each prole (see section “10. Customis-
ing the beverages ”). The order in which all the beverag-
es are displayed is based on the frequency of selection.
To select or enter a prole, press on the prole currently in use
(B4), press the selector (B2) corresponding to the "NEXT>"
symbol until the required prole is displayed, then press on the
prole.
Please note!
• " GST" (GUEST) prole: select this prole to deliver bev-
erages with the default settings. The function is not
active.
• You can rename your personal prole by connecting with
the DeLonghi Coee Link App (only the rst three charac-
ters will be displayed).
• To customise the prole icon, see section “6.14 Customise
prole”.