ECAM65X.
EN page 6 B B2 B3 B10 B1 B4 B2 B14 10:00 SELECT BEVERAGE B11 B15 PROFILE 1 B12 B16 B13 QUANTITY B9 B17 AROMA B8 B7 B6 B5 D1 D C C1 C2 D2 D5 D4 C4 C3 D3 C5 C7 C6 C8 2
A1 A A2 A3 A5 A4 A6 A7 B A21 A8 A9 A20 A10 A19 A18 A11 A15 A12 A16 A13 A17 A14 3
1 2 3 4 5 6 7 8 9 10 11 12 15 16 MIL K 13 14 4
CLEAN 17 18 19 20 21 22 23 24 28A 26 27 28B 30 31 32 PU SH PU SH 25 29 5
CONTENTS 1. FUNDAMENTAL SAFETY WARNINGS ............7 2. SAFETY WARNINGS ....................................8 9.6 Making coffee using pre-ground coffee.......15 10. MAKING CAPPUCCINOS AND MILK-BASED COFFEES .................................................. 15 10.1 Filling and attaching the milk container......15 10.2 Regolare la quantità di schiuma ..................16 10.3 Making cappuccinos and milk-based coffees automatically ..............................................16 10.
1. FUNDAMENTAL SAFETY WARNINGS • The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. • Children should be supervised to ensure that they do not play with the appliance. • Cleaning and user maintenance shall not be made by children without supervision.
Any other use is considered improper and thus dangerous. The manufacturer is not liable for damage deriving from improper use of the appliance. 2. SAFETY WARNINGS 2.1 Symbols used in these instructions Important warnings are identified by these symbols. It is vital to respect these warnings. 2.3 Danger! Failure to observe the warning may result in life threatening injury by electric shock. Important! Failure to observe the warning could result in injury or damage to the appliance.
” In the App, you can also find information, tips and curious facts about the world of coffee, together with information on your machine at your fingertips. B9. Quantity selection Directly selected beverages: B10. CAPPUCCINO B11. LATTE MACCHIATO B12. CAFFELATTE B13. MILK B14. ESPRESSO B15. COFFEE B16. LONG B17. DOPPIO+ This symbol highlights the functions you can control or consult using the App. You can also create up to 6 new beverages and save them in your appliance.
• Do not install the appliance in a room where the temperature could drop below freezing point. Arrange the cord in such a way that it cannot be damaged by sharp edges or contact with hot surfaces (e.g. electric hot plates). • • 5.3 Connecting the appliance Important! Check that the mains power supply voltage corresponds to that indicated on the rating plate on the bottom of the appliance.
” ” • release the main switch (A21) at the back of the appliance (fig. 2). 2. Scroll through the menu items by pressing the selection BEVERAGES arrow corresponding to “NEXT>” until “ SETTINGS” appears on the display; 3. The values for the first beverage appear on the display; 4. The reference user profile is highlighted on the display. The values are displayed on vertical bars. The default value is Important! Never press the main switch while the appliance is on. 8. 8.
1. Press the selection arrow (B2) corresponding to the “ ” symbol (B8) to enter the menu; 2. Scroll through the menu items by pressing the selection arrow corresponding to “NEXT>” until “AUTO-START ” appears on the display; 3. Press the selection arrow corresponding to “AUTO-START ”. Disable (or enable) the function by pressing the (or ); selection arrow corresponding to 4. Press the selection arrow corresponding to “SET TIME ”. The time setting panel appears on the display (B1); 5.
” ” ” ” ” ” 3. Press the selection arrow corresponding to “SET LANGUAGE ”; 4. Press the selection arrow corresponding to the language required (press the selection arrow corresponding to “NEXT>” to display all the languages available); 5. Press the selection arrow corresponding to “ ESC” twice to go back to the homepage. ) Press the selection arrow to disable ( ) or enable ( the request for the PIN when you connect via the APP; 5.
3. Press the selection arrow corresponding to “ STATISTICS” and check all the statistics by scrolling through the items using the selection arrow corresponding to “NEXT>”; 4. Press “ ESC” twice to go back to the homepage. 9. 9.1 Please note! The grinding adjustment dial must only be turned when the coffee mill is in operation. If the coffee is delivered too slowly or not at all, turn one click clockwise towards “7”.
• While the machine is making coffee, delivery can be interrupted at any moment by pressing the selection arrow corresponding to “STOP “. • As soon as delivery has ended, to increase the quantity of coffee in the cup, just press the selection arrow corresponding “EXTRA ”. When the required quantity is reached, press the selection arrow corresponding to “STOP “. Once the coffee has been made, the appliance is ready to make the next beverage. • • • • 9.
• 10.2 At the end of delivery, to increase the quantity of coffee in the cup, press the selection arrow corresponding to “ EXTRA”. • Preparation of each coffee can be customised (see sections “13. Customising the beverages” and “14. Memorising your personal profile”). • Do not leave the milk container out of the refrigerator for long periods. The warmer the milk (5°C is ideal), the poorer the quality of froth produced. Once the coffee has been made, the appliance is ready to make the next beverage.
1. Make sure the hot water/steam spout (C6) is attached correctly to the hot water/steam connection nozzle (A9); 2. Place a container under the spout (as close as possible to avoid splashes); ” 3. Press the selection arrow (B2) corresponding to the “ (B3) to enter the menu; 4. Press the selection arrow (B2) corresponding to the “NEXT>” symbol to display “HOT WATER”; 5. Press the selection arrow corresponding to “HOT WATER”.
5. “CUSTOMISING COFFEE QUANTITY STOP TO SAVE”: Preparation begins and the appliance displays the quantity customising screen in the form of a vertical bar. The star alongside the bar represents the current quantity. 6. When the quantity reaches the minimum quantity you can set, “STOP ” appears on the display (B1). 7. When the required quantity is reached, press “STOP ”. 8. .
When removing the drip tray, the grounds container must be emptied, even if it contains few grounds. If this is not done, when you make the next coffees, the grounds container may fill up more than expected and clog the machine. 15.8 Cleaning the pre-ground coffee funnel Check regularly (about once a month) that the pre-ground coffee funnel (A4) is not blocked. If necessary, remove coffee deposits with the brush (C5) supplied. 15.4 Cleaning the drip tray 15.
15.10 15.11 Cleaning the hot water/steam connection nozzle Cleaning the milk container Each time you prepare milk, clean the connection nozzle (A9) with a sponge to remove milk residues from the gaskets (fig. 22). To keep the frother efficient, clean the milk container (D) every two days as described below: 1. Remove the lid (D2); 2. Remove the milk spout (D5) and intake tube (D4) (fig. 34); 3. Turn the froth adjustment dial (D1) anticlockwise to the “INSERT” position (fig.
” f ” 39 arrow corresponding to “NEXT>”; 5. “EMPTY DRIP TRAY” (fig. 47): Remove, empty and replace the drip tray (A14) and grounds container (A10). Press the selection arrow corresponding to “NEXT>”; 6. “POSITION 2l CONTAINER OK TO START”. Place an empty container with a minimum capacity of 2 litres under the hot water/steam spout (C6) and coffee spouts (A8) (fig. 8); 12. “INSERT FILTER INTO ITS HOUSING” (fig. 48). Press “NEXT>” and extract the water tank.
3. Remove the paper from the water and shake lightly. After about a minute, 1, 2, 3, or 4 red squares form, depending on the hardness of the water. Each square corresponds to one level. 4. TURN DATE INDICATOR TO NEXT 2 MONTHS” (fig. 41): turn the date disk to display the next two months of use. Press the selection arrow corresponding to “NEXT>”; soft water slightly hard water hard water 41 very hard water last a maximum of three weeks. 17.2 Setting water hardness 1.
The filter is now active and you can use the coffee machine. 19. TECHNICAL DATA Voltage: 220-240 V~ 50/60 Hz max. 10 A Power: 1450 W Pressure: 1,5 MPa (15 bar) Water tank capacity: 2l Size LxDxH: 260x480x375 mm Cord length: 1750 mm Weight: 11,9 kg Beans container capacity: 400 g The appliance complies with the following EC directives: 18.2 Replacing the filter Replace the filter (C4) when “REPLACE WATER SOFTENER FILTER, ”appears on the display (B).
21. DISPLAYED MESSAGES DISPLAYED MESSAGE POSSIBLE CAUSE SOLUTION FILL TANK WITH FRESH WATER Insufficient water in the tank (A16). Fill the tank with water and/or insert it correctly, pushing it as far as it will go until it clicks into place. INSERT WATER TANK The tank (A16) is not correctly in place. Insert the tank correctly and press as far as it will go. EMPTY GROUNDS CONTAINER The grounds container (A10) is full. Empty the grounds container and drip tray (A14), clean and replace.
ADD GROUND COFFEE MAX. ONE MEASURE A LONG coffee with pre-ground coffee has been Place pre-ground coffee in the funnel (A4) (fig. requested 13) and press “OK ” to continue and complete delivery. OK FILL BEANS CONTAINER The coffee beans have run out. Fill the beans container (A3-fig. 11). The pre-ground coffee funnel (A4) is clogged. Empty the funnel with the help of the brush (C5) as described in section “15.8 Cleaning the pre-ground coffee funnel”. ESC GROUND TOO FINE.
INSERT WATER SPOUT The hot water spout (C6) is not inserted or is inserted incorrectly Insert the water spout as far as it will go. INSERT MILK CONTAINER The milk container (D) is not inserted correctly. Insert the milk container as far as it will go (fig. 18). INSERT INFUSER ASSEMBLY The infuser (A19) has not been replaced after Insert the infuser as described in section “16.9 cleaning. Cleaning the infuser”.
TURN MILK FROTH ADJUSTMENT DIAL TO CLEAN POSITION Milk has been delivered recently and the tubes inside the milk container (D) must be cleaned. Turn the froth adjustment dial (D1) to CLEAN (fig. 20). TURN THE MILK FROTH ADJUSTMENT DIAL The milk container has been inserted with the froth adjustment dial (D1) in the “CLEAN” position. Turn the dial to the required froth position. DESCALING NEEDED PRESS OK TO START (~40MIN) The machine must be descaled.
The machine must be descaled. The descaling procedure described in section “16. Descaling” needs to be performed as soon as possible. The auto-start function is enabled. To disable the function, proceed as described in section “8.6 Auto-start ”. Energy saving is enabled. To disable the function, proceed as described in section “8.9 Energy saving ”. The appliance is connected to a device via bluetooth. CLEANING UNDERWAY PLEASE WAIT 22.
Coffee does not come out of one or The coffee spouts (A8) are blocked. both of the spouts. The appliance does not come on Clean the spouts with a toothpick (fig. 36B). The power cord (C8) connector is not Insert the connector as far as it will go in the inserted correctly. socket at the back of the appliance (fig. 1). It is not plugged into the mains socket. Plug into the mains socket (fig. 1). The main switch (A21) is not turned on. Press the main switch (fig. 2).
23. ELECTRICAL CONNECTION (UK ONLY) Before using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your home, if you are in any doubt about your supply contact your local electricity company. The flexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 amp capacity. Should this plug not fit the socket outlets in your home, it should be cut off and replaced with a suitable plug, following the procedure outlined below.