Instruction Manual

16
10.2 Adjusting the amount of froth
Turn the froth adjustment dial (D1) to adjust the amount of froth
on the milk delivered while making cappuccinos and milk-based
coees.
Dial
position
Description Recommended for…
NO FROTH HOT MILK (not frothed) /
CAFFELATTE
MIN. FROTH LATTE MACCHIATO /
FLAT WHITE
MAX. FROTH CAPPUCCINO / CAPPUCCI
NO+ / CAPPUCCINO MIX
/ ESPRESSO MACCHIATO /
HOT MILK (frothed)
10.3 Making cappuccinos and milk-based coees
automatically
1. Fill the milk container (D) and attach it as described above.
2. Select the required beverage from the homepage:
• CAPPUCCINO
• LATTE MACCHIATO
• CAFFELATTE
• HOT MILK
• CAPPUCCINO+
• ESPRESSO MACCHIATO
• FLAT WHITE
• CAPPUCCINO MIX
3. A message on the display (B) instructs you to turn the froth
adjustment dial (D1) according to the froth required by the
original recipe. Turn the dial on the milk container lid (D2)
and conrm the selection by pressing " ".
4. After a few seconds, preparation begins automatically and
an image of the selected beverage appears on the display,
together with a progress bar which gradually lls as prepa-
ration progresses.
Please note: general indications when preparing all
cappuccinos and milk-based coees
• " ": press to interrupt preparation completely and
go back to the homepage.
• " ": press to interrupt milk or coee delivery
and move on to the next delivery to complete the beverage.
• At the end of delivery, to increase the quantity of coee in
the cup, press " EXTRA".
• Preparation of each coee can be customised (see sections
“16. Customising the beverages” and “17. Memorising your
personal prole”).
• Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.
Once the coee has been made, the appliance is ready to make
the next beverage.
10.4 Cleaning the milk container after use
Important! Danger of burns
When cleaning the internal tubes of the milk container, a little
hot water and steam leak out of the frothed milk spout (D5).
Avoid contact with splashes of water.
Each time you use a milk function, "TURN DIAL TO <CLEAN>
POSITION TO START CLEANING" appears on the display and the
milk frother lid must be cleaned:
1. Leave the milk container (D) in the machine (you do not
need to empty it);
2. Place a cup or other recipient under the frothed milk spout
(g. 20);
3. Turn the froth adjustment dial (D1) to "CLEAN" (g. 21).
"CLEANING MILK CONTAINER UNDERWAY PLACE A RECIPI-
ENT UNDER MILK SPOUT" appears on the display (B) (g.
22) together with a bar which gradually lls as cleaning
proceeds. Cleaning stops automatically;
4. Turn the dial back to one of the froth selections;
5. Remove the milk container and always clean the steam
connection nozzle (A9) with a sponge (g. 23).
Please note!
• To prepare a number of cappuccinos and milk based cof-
fees, clean the milk container after you have prepared the
last beverage only. To proceed with making the next bever-
ages, press " ".
• If you do not clean the milk container, the symbol ap-
pears on the display to remind you that it needs cleaning.
• The milk container can be kept in the refrigerator.
• In some cases, to clean you must wait for the appliance to
heat up.
11. TEA FUNCTION
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
1. Make sure the hot water/steam spout (C6) is attached cor-
rectly to the hot water/steam connection nozzle (A9);
2. Put a tea bag in the cup, then place the cup under the spout
(as close as possible to avoid splashes);
3. Select " TEA FUNCTION" from the homepage;
4. "HOT WATER FOR"; select:
- the required quantity of water by pressing (g.
24);
- the required water temperature by pressing one of the
proposed teas (each tea, white, green, oolong or black,
corresponds to a specic water temperature) (g. 25);
5. The corresponding image appears on the display (B), to-
gether with a progress bar which lls gradually as prepa-
ration proceeds;