Instruction Manual

14
To reset the default values, proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press < (B10) or > (B8) until " DEFAULT VALUES" ap-
pears on the display (B)Press " ";
3. Press " RESET ALL" to reset all the proles to the origi-
nal parameters, otherwise select the required prole;
4. "RESET DEFAULT VALUES": press " " to conrm (or "
" to leave the parameters unaltered);
5. "DEFAULT VALUES RESET": press " " to conrm and
" " to go back to the homepage.
5.1 Statistics
This displays statistics relating to the machine. To display the
statistics, proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press < (B10) or > (B8) until " STATISTICS" appears on
the display (B);
3. Press " " to verify all the available statistics by pressing
< or >;
4. Press " " to go back to the homepage.
9. MAKING COFFEE
9.1 Selecting the coee aroma
Select the required aroma from the homepage by pressing
" AROMA" (B6):
(see “9.4 Making coee
using pre-ground coee”)
X-LIGHT AROMA
LIGHT AROMA
MEDIUM AROMA
STRONG AROMA
X-STRONG AROMA
Custom (if programmed) /
Standard
9.2 Selecting the coee quantity
Select the required quantity of coee in the cup by pressing
" QUANTITY" (B7):
SMALL SIZE
MEDIUM SIZE
LARGE SIZE
EXTRA-LARGE SIZE
Custom quantity (if pro-
grammed) / Standard
quantity
9.3 Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
However, if after making the rst few coees you nd that the
coee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting the
grinding adjustment dial (A5 - g. 11).
Please note!
The grinding adjustment dial must only be turned when the cof-
fee mill is in operation.
If the coee is delivered too slowly or not
at all, turn one click clockwise towards 7.
For fuller bodied creamier coee, turn
one click anticlockwise towards 1 (do
not turn more than one click at a time
otherwise the coee could be delivered
a drop at a time).
These adjustments will only be evident after at least 2 cups of
coee have been delivered. If this adjustment does not obtain
the desired result, turn the dial another click.
9.4 Tips for a hotter coee
For hotter coee, you should:
• perform a rinse cycle by selecting the "Rinsing" function in the
settings menu (section “8.1 Rinsing”);
• warm the cups with hot water using the hot water function
(see section “12. Delivering hot water”);
• increase the coee temperature in the settings menu (see
section “4.1 Coee temperature”).
9.5 Making coee using coee beans
Important!
Do not use caramelised or candied coee beans as they could
stick to the coee mill and make it unusable.
1. Fill the container (A3) (g. 12) with coee beans;
2. Place a cup under the coee spouts (A8);
3. Lower the spouts as near as possible to the cup (g. 13).
This makes a creamier coee;
4. Press <(B10) or > (B8) until the required coee is
displayed;
5. Then select your required coee from the homepage: