User's Manual

DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY

ADD COFFEE

COFFEE MAX. 1 MEASURE

A LONG coee with pre-ground coee has

been requested

Place pre-ground coee in the funnel (A4) (g. 14)

and press " " to continue and complete

delivery.

FILL BEANS CONTAINER The coee beans have run out. Fill the beans container

(A3 - g. 12)

The pre-ground coee funnel

(A4)

clogged.

Empty the funnel with the help of the brush (C5) as

described in section “18.8 Cleaning the pre-ground

coee funnel”.

GROUND TOO FINE. ADJUST

MILL 1 CLICK WHILE IN

OPERATION

The grinding is too ne and the coee is

delivered too slowly or not at all.

Repeat coee delivery and turn the grinding adjust-

ment dial

(A5) (g. 11)

one click clockwise towards 7

while the coee mill is in operation. If after making

at least 2 coees delivery is still too slow, repeat the

correction procedure, turning the grinding adjust-

ment dial another click until delivery is correct (see

section “9.5 Adjusting the coee mill”

)

. If the prob-

lem persists, make sure the water tank (A16) is fully

inserted.

If the water softener lter (C4) is present,

an air bubble may have been released in-

side the circuit, obstructing delivery.

Insert the hot water/steam spout (C6) in the appli-

ance and deliver a little water until the ow becomes

regular.

SELECT A MILDER TASTE

OR REDUCE PREGROUND

COFFEE QUANTITY

Too much coee has been used.

Select a milder taste by pressing " AROMA" (B6)

or reduce the quantity of pre-ground coee (maxi-

mum 1 measure).