User's Manual

12
8.6 Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coee immediately.
Please note!
To enable this function, the time must already be set correctly
(see section “8.5 Adjust time ”).
To enable auto-start, proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press (B10) or (B8) until " AUTOSTART" ap-
pears on the display (B);
3. Select the function by pressing " ". The time setting
panel appears on the screen;
4. Press or corresponding to the hours and minutes
until the required auto-start time is displayed;
5. Press or to enable or disable
auto-start.
6. To conrm, press " " (or cancel and go back to
the settings menu by pressing " "), then press "
" to go back to the homepage.
The auto-start time is now set and the corresponding symbol is
displayed to indicate that the function has been enabled.
Please note!
When the appliance is turned o using the main switch (A21),
the auto-start setting (if enabled) is lost.
8.7 Auto-o (standby)
Auto-o can be set so that the appliance goes o after 15 or 30
minutes, or 1, 2 or 3 hours.
To programme Auto-o, proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press (B10) or (B8) until " AUTO-OFF" appears
on the display (B), together with the current selection (15
or 30 minutes, or 1, 2 or 3 hours);
3. Press " " on the display to select the required value;
4. Press " " to go back to the homepage.
Auto-o is now programmed.
8.8 Cup warmer
To warm the cups before making coee, you can enable the cup
warmer (A6) and rest the cups on the shelf.
1. Press " " (B2) to enter the menu;
2. Press (B10) or (B8) until " CUP WARMER" ap-
pears on the display (B);
3. Press " " to enable- or disable- the
cup warmer.
4. Press " " to go back to the homepage.
8.9 Energy saving
Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
To disable or enable "Energy Saving", proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press (B10) or (B8) until " ENERGY SAVING"
appears on the display (B);
3. Press " " to enable- or disable-
energy saving.
4. Press " " to go back to the homepage.
The corresponding symbol appears on the display alongside the
time to indicate that the function has been enabled.
8.10 Coee temperature
To modify the temperature of the water used to make the coee,
proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press (B10) or (B8) until " COFFEE TEMPERA-
TURE" appears on the display (B) together with the current
selection (LOW, MEDIUM, HIGH or MAXIMUM);
3. Press " " to select the required temperature;
4. Press " " to go back to the homepage.
Please note!
A dierent temperature can be set for each prole (see section
“17. Memorising your personal prole”).
8.11 Water hardness
For instructions on setting water hardness, see section “20. Set-
ting water hardness”.
8.12 Selecting the language
To modify the language of the display (B), proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press (B10) or (B8) until " SET LANGUAGE"
appears on the display;
3. Press " " : press or to display and select the
ag corresponding to the required language;
4. Press " " twice to go back to the homepage.
8.13 Beep
This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed. To
disable or enable the beep, proceed as follows:
1. Press " " (B2) to enter the menu;
2. Press (B10) or (B8) until " BEEP" appears on
the display (B);