Instruction Manual

20
No milk froth is formed when
making cappuccino
Model ECP35.31: the ring is in the “HOT
MILK” position
MODEL ECP35.31: push the ring into the “CAP-
PUCCINO” position
Milk not cold enough Always use milk at refrigerator temperature
Cappuccino maker dirty Clean as described in the section “Cleaning the
cappuccino maker”
Scale in the water circuit Descale as described in the section “Descaling”
Press the ON/OFF button to turn the appliance on
again
few seconds after switching on
The mode selector dial is not in the l po-
sition (Standby)
Turn the mode selector dial to the l position
(Standby), then press the ON/OFF switch.
-
-
-