ELECTRIC RADIATOR ECLIPSE Instructions for use SDH2000
fig.1 fig.3 fig.
OPERATION AND USE OF THE ELECTRIC RADIATOR Thank you for choosing a De'Longhi electric radiator. For best results and maximum safety, read these instructions carefully before using the radiator. Use the appliance for domestic use only! ELECTRICAL CONNECTIONS Before plugging the appliance into the mains socket, check that: • the mains power supply corresponds to the value indicated on the rating plate on the back of the appliance; • the power socket and electrical circuit are adequate for the appliance.
TABLE OF POWERS: Power levels Side Min Med Max Single panel ~ 400W ~ 600W ~ 950W Single panel ~ 400W ~ 600W ~ 950W Double panel ~ 800W ~ 1200W ~ 1900W OPERATION • Select the operating mode using the " " and " " buttons on the remote control. - The " " button selects the radiating side you want to activate: front side active. back side active. front and back sides active.
- - If the power cable is damaged, it must be replaced by the manufacturer, an authorised technical service centre or qualified personnel in order to avoid all risk. You are recommended to keep the appliance out of draughts as they could reduce efficiency. Prolonged use is not recommended as the radiator could overheat. As with all electrical appliances, the instructions aim to cover the largest possible number of situations.
1121006IDL/03.