Instruction Manual

8
TIPS FOR USE AND CLEANING
The rst time the appliance is used, all the accessories and inter-
nal components should be washed with water. Then make a few
preparations using water instead of milk.
Please note:
Preparation can be interrupted at any moment by simply lifting
the milk container from the base or pressing the
button
once.
Never wash in a dishwasher.
• Never use solvents, abrasive detergents or alcohol to clean
the appliance (g. 13).
TROUBLESHOOTING
Problem Cause Solution
The appliance does not come on It is not plugged into the mains socket. Plug into the mains.
The appliance has a safety device which
imposes a 30 second pause between one
preparation and the next.
Wait, then select the required function.
There is little or no froth on the milk The “Hot milk (not frothed)” function is
selected.
Prepare the milk again, using milk at
refrigerator temperature and pressing
the function button once (red LED on
steadily).
The milk is too hot. Use milk at refrigerator temperature.
After cleaning, the whisk (C) has not been
replaced in the hot/frothed milk accesso-
ry, or the whole accessory is absent or
incorrectly positioned.
Insert the whisk in the accessory and
make sure the accessory is correctly po-
sitioned in the appliance.
The milk overows. Too much milk has been placed in the
container.
Always respect the MAX quantity indica-
ted for each preparation.
The appliance is standing on a sloping
surface.
The appliance must always be operated
on a at surface.
The blue LED ashes
The appliance has been operated without
milk.
Remove the appliance from the base.
Wait until it cools down. To cool it
down faster, pour milk at refrigerator
temperature into the container.
TECHNICAL DATA
Voltage: 120V~60Hz
Absorbed power: 500W
Size DxWxH: 130x180x220 mm
Cord length: 800 mm
Weight: 1,2 kg