Instruction Manual

11
4. INSERT WATER SPOUT”: Check that
the hot water spout is fully inserted
on the nozzle and place a container
with a minimum capacity of 100 ml
underneath (g. 4).
5.  “WaterdeliveryPRESSOK”:presstheOKicononthe
display.
6. The appliance starts delivering water from the hot water
spout.
7. The appliance ends the rst start up procedure and goes
o automatically.
The coee machine is now ready for normal use.
Please note:
• Whenusingtheapplianceforthersttime,youneedto
make 4-5 cups of coee or 4-5 cappuccinos before it starts
to give satisfactory results.
TURNING THE APPLIANCE ON
Please note:
Before turning the appliance on, make sure the main switch on
the back of the appliance is in the I position (g. 1).
Each time the coee machine is turned on, it performs an
automatic preheat cycle and, if necessary, a rinse cycle which
cannot be interrupted. The appliance is ready for use only after
completion of this cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coee spouts
and is collected in the drip tray underneath. Avoid contact with
splashes of water.
• Toturntheapplianceon,pressandholdthe button
for a few seconds (g. 5):
The message “Heating up, please wait” is
displayed.
When heating is complete, the message changes
to “RINSING”.
The appliance is ready for use when an espresso
coee cup appears on the display.
TURNING THE APPLIANCE OFF
Whenever the coee machine is turned o after being used to
make coee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, a little hot water ows from the coee spouts.
Avoid contact with splashes of water.
Please note:
If you will not be using the appliance for some time, unplug
from the mains socket:
• rstturntheapplianceobypressingthe button
(g. 5);
• placethemainswitchinthe0position(g.6).
Important!
Never place the main switch in the 0 position while the
appliance is on.
MENU SETTINGS
To access the settings menu, press the MENU icon. Scroll through
the menu by pressing the or icon.
To exit the menu, press the ESC icon.
The following can be selected from the menu: Rinsing, Select
background, Descale, Install water lter, Set time, Auto-start,
Auto-o, Energy Saving, Set temperature, Water hardness, Beep,
Default values, Statistics, Set language.
Rinsing
Use this function to deliver hot water from the spout to heat the
internal circuit and make the coee delivered hotter.
Press the OK icon to select the function. Press OK
again to conrm and start rinsing.
After rinsing, the appliance is automatically ready to make the
next drink.
Please note!
During rinsing, a little hot water comes out of the coee spouts
and is collected in the drip tray underneath.
Avoid contact with splashes of water.
Select background
Use this function to change the color of the display background.
Press the OK icon to select the function. Press the
or icon to select the required background,
then press OK again to conrm the choice.
Please note!
This menu item can be customised in all proles (see
“Memorising your personal prole” on page 17).
Descale
For instructions on descaling, see page 20.