Instruction Manual

13
- number of coees delivered;
- number of milk drinks delivered (CAPPUCCINO, LATTE
MACCHIATO,CAFFELATTE,MILK);
- number of hot chocolates delivered;
- total litres of water delivered;
- number of water lters used;
- how many times the machine has been descaled.
Setting the language
To modify the language of the display, proceed as follows:
Press the OK icon to select the function. Press the
or icon to select the required language,
then press OK to conrm the choice.
MAKING COFFEE
Selecting the coee taste
The appliance is set by default to make coee with a standard
taste. You can select one of the following tastes displayed
under the glass:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the icon (g. 7) repeatedly
until the required taste is displayed.
Selecting the quantity of coee in the cup
The appliance is set by default to make a standard quantity of
coee.
To select the quantity of coee, press the icon (g.
8) repeatedly until the message corresponding to the required
quantity of coee is displayed:
Corresponding
coee
ESPRESSO
(. oz/ml)
My coee
≃ 1.01 /30
(program. from
≃0.68/20 to
≃6.09/180)
Short
≃1.7/50
Standard
≃ 2.37/70
Long
≃ 3.38/100
Extra long
≃ 4.4/130
Customizing the “My coee” quantity
The appliance is set by default to automatically
deliver 30 ml of “My coee”. To modify this
quantity, proceed as follows:
1. Place a cup under the coee spouts (g. 9).
2. Press the icon repeatedly (g. 8) until “My
coee” is displayed.
3. Press the 1 cup icon (g. 10). The appliance starts
making the coee;
4. Press the PROG icon. The appliance starts programming;
5. As soon as the coee in the cup reaches the required level,
press the STOP or icon again.
The quantity set has now been programmed.
Please note :
• Youcanprogrammeasinglecupofcoeeonly.
• To cancel programming of “My coee”, press the EXIT
PROG icon.
Please note!
“My coee” can be customised in all proles (see
“Memorising your personal prole” on page 17).
Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
However, if after making the rst few coees you nd that
delivery is either too fast or too slow (a drop at a time), this
can be corrected by adjusting the grinding adjustment dial
(g. 11).
Please note!
The grinding adjustment dial must only be turned when the
coee mill is in operation.
For fuller bodied creamier coee, turn
one click counter clockwise towards “1”
(ner ground coee).
For faster delivery (not a drop at a time),
turn one click clockwise towards “7”
(coarser ground coee).
These adjustments will only be evident after at least 2 cups of
coee have been delivered.
If delivery is still too fast or too slow, repeat the correction,
turning the dial another click.
Tips for a hotter coee
For hotter coee, you should:
• performarinsecyclebeforedeliveringthecoee,using
the “Rinsing” function in the menu;
• if Energy Savingis disabled, place thecups on thecup