5713222121/05.14 De’Longhi Appliances via Seitz, 47 31100 Treviso Italia www.delonghi.
ETAM29.
EN page 6 B B3 B4 B5 B6 B7 B2 B8 B1 B9 B15 B14 B13 B12 B11 B10 C C1 C2 C4 C3* C5 2
A A21 A1 A20 A4 A2 A5 A3 A18 A19 A6 B A17 A7 A8 A9 A16 A15 A10 A22 A14 A11 A12 A13 3
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 4
18 19 20 PU SH 17 22 23 24 PU SH 21 26 25 27 0,5 L B A 28 30 29 5 31
CONTENTS DELIVERING HOT WATER.................................. 14 FUNDAMENTAL SAFETY WARNINGS.....................7 CLEANING....................................................... 14 Letters in brackets.....................................................8 Troubleshooting and repairs.....................................8 Cleaning the machine.............................................14 Cleaning the coffee grounds container....................14 Cleaning the drip tray and condensate tray.............
FUNDAMENTAL SAFETY WARNINGS • • • • • Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Never clean by immersing the appliance in water. This is an household appliance only.
IMPORTANT SAFEGUARDS Symbols used in these instructions Instruction for Use Read this Instruction for Use carefully before using the appliance. Failure to follow this Instruction for Use may result in burns or damage to the appliance. The manufacturer is not liable for damage deriving from failure to respect this Instruction for Use. Important warnings are identified by these symbols. It is vital to respect these warnings.
A13. A14. A15. A16. A17. A18. A19. A20. A21. A22. BEFORE USE Checking the appliance Drip tray Coffee grounds container Main switch (ON/OFF) Infuser door Infuser Water tank Water softener filter housing Water tank lid Grinding adjustment dial Power cord After removing the packaging, make sure the product is complete and undamaged and that all accessories are present. Do not use the appliance if it is visibly damaged. Contact De’Longhi Customer Services.
2. Place a container with a minimum capacity of 100 ml under the cappuccino maker (fig. 3). 3. Plug the appliance into the mains socket and press the main switch on the side of the appliance (fig. 4). button (A5) (fig. 5). 4. Press the light flashes on the touch screen (fig. 6). 5. The 6. Turn the steam dial to the “I” position (fig. 7). Water is delivered from the cappuccino maker. 7. When delivery stops automatically, turn the steam dial back to the “O” position. The appliance goes off. button (A5) again.
2 hours 3 hours 4. press the icon (B12) to confirm (or (B10) to exit without making the modification). The lights/icons go off. The auto-off time is now programmed. • • ENERGY SAVING Use this function to enable or disable energy saving. This mode is active by default, reducing energy consumption while the machine is on in compliance with current European regulations. To change the setting, proceed as follows: 1. With the appliance off (standby), but the main switch pressed (fig. 4); 2.
If the coffee is delivered too slowly or not at all, turn one click clockwise towards “7”. For fuller bodied creamier coffee, turn one click anticlockwise towards “1” (do not turn more than one click at a time otherwise the coffee could be delivered a drop at a time). These adjustments will only be evident after at least 2 cups of coffee have been delivered. If this adjustment does not obtain the desired result, turn the dial another click.
2. Fill a container (preferably one with a handle to avoid scalding) with about 100 grams of milk for each cappuccino. In choosing the size of the container, bear in mind that the milk doubles or triples in volume; 1. Place a sufficiently large cup or glass under the coffee spouts. icon (B15) until the icon flashes 2. Press and hold the and all the alarm lights flash 4 times; 3. Release the icon. The appliance starts delivering coffee; 4.
Cleaning the coffee grounds container 2. Wait a few minutes for the cappuccino maker to cool down. Turn the cappuccino maker downwards to remove it (fig. 15). 3. Remove the nozzle downwards (fig. 16). 4. Make sure the two holes shown by the arrow in fig. 17 are not blocked. If necessary, clean with a pin. 5. Reinsert the nozzle and replace the cappuccino maker on the nozzle, pushing it upwards and turning it until it is attached.
Cleaning the water tank 7. Once inserted, make sure the two red buttons have snapped out (fig. 27). 8. Close the infuser door. 1. Clean the water tank (A18) regularly (about once a month and whenever you replace the water softener filter (C3) (if provided) with a damp cloth and a little mild washing up liquid. 2. Remove the filter (if present) and rinse with running water. 3. Replace the filter (if provided), fill the tank with fresh water and replace the tank. 4.
13. Empty the container used to collect the descaler solution and replace it empty under the hot water spout. back to the I position to 14. Turn the hot water/steam dial start rinsing. Hot water comes out of the spout. 15. When the water tank is completely empty, the icon and light flash on the touch screen. Turn the hot to the O position; water/steam dial 16. Extract the water tank and fill with fresh water up to the MAX level; 17.
TECHNICAL DATA 9. Deliver hot water by turning the hot water/steam dial (B1) to the I position. 12. Deliver at least 500 ml of hot water, then turn the hot water/ steam dial to the O position. The filter is now active and you can use the coffee machine. Voltage: 220-240 V~ 50/60 Hz max. 10A Absorbed power: 1450W Pressure: 1,5MPa (15 bar) Max. water tank capacity: 1,4 l Size: LxDxH: 195x480x340 mm Cord length: 1050 mm Weight: 9,1 kg Max.
FLASH. + ON + FLASH. The grinding is too fine and the coffee is delive- Repeat coffee delivery and turn the grinding red too slowly or not at all. adjustment dial (fig. 8) one click clockwise towards “7” while the coffee mill is in operation. If after making at least 2 coffees delivery is still too slow, repeat the correction procedure, turning the grinding adjustment dial another click until delivery is correct (see the section: “Adjusting the coffee mill on page 12).
TROUBLESHOOTING Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact Customer Services. PROBLEM POSSIBLE CAUSE SOLUTION The coffee is not hot. The cups were not preheated. Warm the cups by rinsing them with hot water (Please note: you can use the hot water function). The infuser (A17) has cooled down be- Before making the coffee, heat the infuser by cause 2/3 minutes have elapsed since rinsing using the rinse function (page 10).
The milk is not frothed Cappuccino maker dirty. Clean as described in the section “Cleaning the cappuccino maker after use” (page 13). Steam delivery stops A safety device stops steam delivery Wait, and then enable the steam function after 3 minutes. again. ELECTRICAL CONNECTION (UK ONLY) Before using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your home, if you are in any doubt about your supply contact your local electricity company.
