Instruction Manual

5
Use
en
SHORT CORD INSTRUCTIONS
•
A short power
cord is provided to reduce risks resulting
from becoming entangled in or tripping over a longer
cord.
• Longer,detachablepowersupplycordsorextensioncords
are available and may be used if care is exercised in their
use.
• If an extension cord is used, the marked electrical
rating should be at least as great as the electrical rating
of the appliance. If the appliance is provided with 3-
wire, grounding type cord, the extension should be a
GROUNDINGTYPE3-WIRECORD.Thelongercordshould
be arranged so that it will not drape over the counter-
top or table top where it can be pulled on by children or
tripped over.
USE
Before use
• Removeallpackagingfromthekettleandpowerbase.
• Removeanylabelsfromtheouterstainlesssteelsurfaces.
• Removethelter(g.1)andwashwithwater(g.2).
a
c
b
1
2
a
c
b
1
2
Refertopage5“Removingthelter”.
• Fillthekettleandboil.
• Theboiledwatershouldbediscardedandthekettlerinsed
out with cold water.
This procedure should be carried out three times, to
removeanymanufacturingdust,etc.
• Afterthekettlehasbeenrinsedout,re-tthelter(g.
3).
a
c
b
1
2
Power base with 360° access
Withthespeciallydesignedpowerbaseandcentralconnector,
youcannowsetthekettleonthebaseatanyangle,fromany
position.
• Release cord from storage base and adjust length by
winding around the base to give the correct cord length
toreachtheplugsockettobeused(g.4).
a
c
b
1
2
• Donotleaveloosecordhangingovertheedgeofwork
surfaces.
Filling
• Removethekettlefromthebaseunitbeforelling.
• Openlidandllkettletodesiredlevel.
Do not ll with less than 10,14 .oz. (0,3 litre) of
water to prevent the kettle running dry while operating;
misuse of this kind will shorten the life of the element.
Do not ll with more than 57,48 .oz. (1,7 litres) of
water(uptotheMAXlevel).If the kettle is overlled,
there is a risk that boiling water may be ejected
causing burns.
Switching on
• Plugthepowerbaseintothemainssocket.
• Placekettleonpowerbase.
• PresstheON/OFFswitchdown(g.5)toswitchthekettle
on.
• Thepilotlightwillswitchon.
• Thekettlewillautomaticallyswitcho oncethewater
isboiled(theON/OFFswitchwillclickupwardsandthe
lightswillswitcho).
a
c
b
1
2
• Toturnthekettleobeforethewaterboils,youmaymove
3
5
4
1
2