CORDLESS KETTLE 1771042IDL/02.
EN Description of Appliance Removable lid Filter Max water level indicator Kettle body ON/OFF switch Twin power-on indicator lights 360° base with cord storage Plug 2
Thank you for choosing this De’Longhi kettle. To get the best results from your new kettle, read these instructions carefully and retain for future reference. This is the only way to ensure optimum results and maximum safety. Safety Warnings Please read these instructions before operating and retain for future reference. • Ensure that your mains supply voltage is the same as that marked on the underside of your kettle.
Using for the first time • Before use, check that the appliance has not been damaged during transport. • Remove all packaging from the kettle and power base. • Remove any labels from the outer surfaces except the rating label. • Remove the filter (fig. 1) and wash it with water (fig. 2) (refer to page 5 “Removing the scale filter”). • Fill the kettle to the max level and boil. • The boiled water should be discarded and the kettle rinsed out with cold water.
just boiled, wait a minute or so before re-boiling the kettle. Do not attempt to hold the ON/OFF switch in the “on” position or adjust the switch mechanism. 2) Safety cut-out If the kettle is switched ON with too little or no water, it is protected against damage by a safety cut-out device which will switch off the power. If this cut-out operates, disconnect the kettle from the mains supply and leave to cool down before refilling with cold water (otherwise the element could be damaged).
