Cordless Kettle Instructions

CORD EXIT

Fig.1

Fig.2

Fig.3

Fig.4

Kettle KBO3001

Using for the first time

• Before use, check that the appliance has not been damaged dur-

ing transport.

• Remove all packaging from the kettle and power base.

• Remove any labels from the outer surfaces except the rating

label.

• Remove the filter (fig. 1) and wash it with water (fig. 2) (refer

to page 5 “Removing the scale filter”).

• Fill the kettle to the max level and boil.

• The boiled water should be discarded and the kettle rinsed out

with cold water.This procedure should be carried out twice to

remove any manufacturing dust, etc.

•After the kettle has been rinsed out, refit the filter (fig. 3).

Using the kettle

With the specially designed power base and central connector,

you can now set the kettle on the base at any angle, from any

position.

• Release cord from storage base and adjust length by winding

around the base to give the correct cord length to reach the

plug socket to be used (fig. 4).

• Do not leave loose cord hanging over the edge of work sur-

faces.

Filling

• Remove the kettle from the base unit before filling.

• Remove the lid and fill the kettle to the desired level.

Do not fill with less than 0,3 litre of water (min level) to

prevent the kettle running dry while in use; misuse of this kind

will shorten the life of the element.

Do not fill with more than 1,7 litres of water (max. level).

If the kettle is overfilled, there is a risk that boiling

water may overflow and cause burns.

•To close the lid, push it onto the kettle body until it clicks firmly

into place.

• The water level indicator enables you to see the quantity of

water in the kettle.