instructions CORDLESS KETTLE KBO3001
Description of Appliance The following terms are used throughout the instruction manual Removable lid Filter Max water level indicator Kettle body ON/OFF switch Twin power-on indicator lights 360° base with cord storage Plug 2 Kettle KBO3001
Thank you for choosing this De’Longhi kettle.To get the best results from your new kettle, read these instructions carefully and retain for future reference.This is the only way to ensure optimum results and maximum safety. Safety Warnings Please read these instructions before operating and retain for future reference. • Ensure that your mains supply voltage is the same as that marked on the underside of your kettle.
Service and Customer Care • If the cord is damaged it must, for safety reasons, be repaired by De’Longhi or an authorised De’Longhi service agent. • Please refer to the enclosed guarantee leaflet for service and assistance details. Warning Electrical Requirements this appliance must be earthed The flexible mains lead is supplied connected to a B.S. 1363 Green and Yellow to fused plug having a fuse of 13 amp capacity.
Using for the first time • Before use, check that the appliance has not been damaged during transport. • Remove all packaging from the kettle and power base. • Remove any labels from the outer surfaces except the rating label. • Remove the filter (fig. 1) and wash it with water (fig. 2) (refer to page 5 “Removing the scale filter”). • Fill the kettle to the max level and boil. • The boiled water should be discarded and the kettle rinsed out with cold water.
Switching on • • • • • Plug the power base into the mains socket. Place the kettle on the power base. Press the ON/OFF switch down (fig.5) to switch the kettle on. The power-on indicator lights will illuminate. The kettle will automatically switch off once the water is boiled (the ON/OFF switch will click upwards and the lights will switch off ).
Cleaning and maintenance Cleaning the kettle • Allow the kettle to cool down fully and disconnect the appliance from the mains before cleaning. • Do not immerse the kettle or base in water. • Use a soft dampened cloth to wipe the outside of the kettle and dry with a soft, dry cloth. • DO NOT use harsh scouring agents. • Ensure that all electrical connectors and sockets are kept dry. Scale Scale is mainly calcium carbonate (chalk), a harmless, naturally occurring mineral found in most water supplies.
Descaling It is vital to clean and descale the kettle and filter regularly in order to maintain it in good working order. Failure to descale your kettle may invalidate your guarantee. • It is recommended to use specific (store bought) products for descaling of kettles. • When limescale starts to build up on the heating element, buy a suitable descaler and descale your kettle. After descaling, boil with fresh water several times and discard. Clean any descaler off the kettle – it can damage the parts.