Instruction Manual

7
appliance from the mains electrical supply. Make sure
that your hands are clean and free from soap, cream or
anything which might taint the water.
- Empty the kettle and remove the lter as shown in g.
1. Rinse under a tap whilst brushing with a soft brush
(g. 2) and replace the lter (g. 3). Filter may pose
suocation risk, do not let it unattended after
cleaning.
To clean the kettle and the scale lter
It is vital to clean and descale regularly in order to maintain
good working order. Excessive scale build-up may aect the
performance of the product and shall be avoided.
- Use descaler for kettles (tip: use citric-acid based
descaling solutions). When limescale starts forming
on the heating element, buy a suitable descaler for
kettles and descale according to the instructions given
on the descaler pack.
- After descaling, boil repeatedly with fresh water and
rinse thoroughly to completely eliminate all residues
of descaler which could damage the appliance. Repeat
the boil and rinse steps for at least three times.
- If the lter requires descaling, remove and immerse in
the same descaling solution.
- Make sure electric parts are completely dry before
using the kettle.
TECHNICAL CHARACTERISTICS
Supply voltage See rating plate
Absorbed power “